Experimental and statistical investigation of the three-point bending strength of the composite sandwich beams with trapezoidal core

Abstract

This paper aims to evaluate the influence of graphene nanoparticles and the structural configuration of the core as independent variables on the flexural strength of the composite sandwich beams by combining experimental and statistical methods. Composite sandwich beams with trapezoidal cores were fabricated using carbon fiber/epoxy and vacuum infusion process. Central composite design (CCD), a subset of response surface methodology (RSM), was employed to statistically analyze the main effect of three input variables, core height, core angle, and graphene content on the flexural strength of the beams. The flexural properties of the beams were derived using a three-point bending test. The experimental and statistical results indicated that the maximum bending load was increased by increasing the height and angle of the core, and the optimal mixing percentage of graphene and epoxy was 0.2 to 0.3 weight percentage. In addition, the experimental results were compared with the numerical simulation obtained from ABAQUS finite element software and the numerical results were found to be in good agreement with the experimental results.

Influences of nano-SiO2 on the tensile, flexural, and compressive characteristics of the open-hole carbon fiber-reinforced polymer laminated composites: experimental study

“…Bending strength, bending modulus, and tensile strength of the resin epoxy EPL1012 is 100, 2750, and 60 MPa, respectively [24]. Tensile strength, tensile modulus, and mass density of the carbon fiber is 3500 MPa, 230 GPa, and 1750 kg m −3 , respectively [25].…”

Effects of core geometry, silica nanoparticles, and polyurethane foam on the mechanical properties of a novel circular-shaped core sandwich panels under compression test: Experimental study

“…They investigated the effects of various parameters, such as the height and angle of the sandwich structure core, the volume fraction of nanoparticles, and the foam on the compressive strength of the structure. Azadi et al 11 experimentally and numerically examined the effect of core geometry and volume fraction of GNPs on the strength of carbon fiber sandwich beams subjected to three-point bending loads. They studied the structural parameters statistically using a central composite design and response surface methodology.…”