Experimental investigation of the impact of GMAW welding parameters on the mechanical properties of AISI 316L/ER 316L using quaternary shielding gas

Abstract

In this study, the parameters of Metal Inert Gas (MIG) and Metal Active Gas (MAG) were investigated of AISI 316L/ER 316L. A quaternary shielding gas mixture consisting of Argon (Ar), Helium (He), Carbon Dioxide (CO2), and Nitrogen (N2) was chosen. The Taguchi orthogonal array (OA-L9) methodology was employed to explore optimal welding settings, including arc current (120A, 160A, 200A), wire feed rate (3, 3.5, 4 m/min), and shielding gas combination (G1, G2, G3). The findings highlighted the importance of shielding gas in influencing the ultimate tensile strength (UTS), elongation percentage (EL.%), and material toughness of welding joints. Notably, the highest UTS (515.77 MPa), EL.% (20.85%), and material toughness (133J) were achieved by the specific group gas combination shown as G1. It is recommended to configure welding parameters to an arc current of 160A, a wire feed rate of 4 m/min, and the G1 gas combination. Welded specimens using a G1 gas mixture showcased the best UTS and EL.%. Additionally, it was found that the fusion zone (FZ) and heat-affected zone (HAZ) hardness are most profoundly influenced by the choice of gas combination (G2), resulting in the best hardness values of 253.79 HV and 239.68 HV, respectively. The optimal parameters for achieving the desired material hardness were precisely identified as (120A, 3 m/min, G2). These insights offer a pathway to enhance welding performance and, in turn, elevate the quality and efficiency of industrial applications.