Experimental Studies of Effect of Shearer Auger Operating Device Effective Width on Effectiveness of Loading Process

Abstract

Intensification of coal mining from mine seams of 0.55–1.20 m thick requires increasing efficiency of loose coal loading that may be achieved by selecting the optimal parameters of auger operating device of a shearer. The most reliable way to determine effect of the auger parameters on the energy parameters of the shearer operation is experimental research in actual operating conditions. As the subjects of the research, we selected up-to-date UKD400 and UKD200-500 shearers, operating in representative conditions of the Krasny Partizan mine of SE SVERDLOVANTRATSIT and Ternovskaya mine of DTEK PAVLOGRADUGOL PJSC. An adaptive method for specific mining operating conditions is proposed for determining the specific energy consumption of the shearers on material disruption and loading for thin seams in actual operating conditions based on fixing the values of currents of the cutting drive motors. Based on processing of the experimental data, an indicative dependence of the power for rock mass loading on the feed rate and the effective width of the operating device is determined. Increasing the auger effective width results in increasing the loading power and specific energy consumption. At the same time, the higher the shearer feed rate, the greater the growth of the loading power and specific energy consumption. This is due to the beginning of the process of loose rock mass circulation, and the larger the auger effective width, the more intensive the circulation process, and at the lower feed rate of the shearer the process starts. A method is proposed for selecting the auger optimum effective width based on the criteria of minimum specific energy consumption and maximum commercial productivity.