Experimental Studies of Fiber-Reinforced Concrete under Axial Tension

Abstract

The design of a stand for testing concrete and fiber-reinforced concrete specimens-"eight" in tension, which provides axial load application and minimizes the effect of stress concentration at the ends of the specimen. The design of the stand is such that the distance between the axis of load application and the central hinge is 108 cm, and between this hinge and the axis of the test specimen is 21 cm, as a result of which the load transferred to the specimen is 5.143 times greater than the applied one. At the first stage of testing, it was found that the optimal characteristics of the fiber-concrete mixture is a matrix with a large aggregate ≤ 10 mm with 1.0% fiber reinforcement. At the second stage, the ultimate strength of fiber-reinforced concrete for axial tension was determined - 1.28 MPa when reinforced with wave fiber and 1.37 MPa when reinforced with anchor fiber, which amounted to 4.1% and 4.4% of compressive strength, respectively. It was also found that concrete reinforced with anchor fiber has higher deformation properties than concrete reinforced with wave fiber.