Coriander leaves weighing 25 ± 0.02 g were dried until from the initial moisture content of %87.56 ± 0.04 to the final ones of %10.57 ± 0.07 using natural drying at shade, convective drying at 50°C and 1 m s-1 air velocity, and microwave drying at 200 and 400 W in 4680, 630, 85, and 16.50 minutes, respectively. Whereas energy consumption was not recorded in natural drying, without taking into account the energy consumption of air-conditioning devices used to fix the temperature at 25 ±1°C and relative humidity at 60 ± 5% conditions in a shaded room, energy consumption at 50°C, 200 W and 800 W was recorded as 10.290, 0.283, and 0.220 kWh, respectively. The closest results to fresh leaves in terms of color parameters were measured at 800 W, followed by 200 W. As in the color parameters, we analyzed the closest results to the fresh product in terms of total chlorophyll content, protein, phosphorus, potassium, and zinc at 800 W. On the other hand, we observed the calcium, magnesium, and iron closest to the fresh samples at 800 and 200 W. Although all drying techniques caused a similar reduction in sodium, the method with the closest results to fresh leaves for manganese was 200 W. After raw material, the highest copper was measured in natural drying and microwave drying at 800 W. Consequently, the most suitable technique for drying of coriander leaves was 800 W according to drying and quality parameters.