Experimental validation of virtual absorbed energy of piezoelectric patch actuators in decentralized velocity feedback control of a plate

Yu, Yong; Sun, Hongling; Cao, Yin; An, Fengyan; Jiang, Yang

doi:10.1016/j.jsv.2014.12.017

Cited by 6 publications

(3 citation statements)

References 23 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Due to the reduced complexity and better feasibility for hardware implementation of multi-channel control systems, the decentralized control technique has been widely used [37][38][39][40][41][42][43][44][45]. To compensate the performance loss, a recent research proposed a method that properly chooses a so-called eigenvalue matrix so that a two-channel decentralized ANC system achieves the same noise reduction performance as the centralized one with guaranteed convergence [44].…”

Section: Decentralized Controlmentioning

confidence: 99%

“…The decentralized control strategy could be generalized to a system with more channels and different gradient searching methods [40]. Experiments using a decentralized active control system to reduce the vibration of a plate have been carried out in [43]. To compensate the instability caused by decentralized structure, a digital phase lag compensator has been designed.…”

Section: Decentralized Controlmentioning

confidence: 99%

See 1 more Smart Citation

Some Practical Acoustic Design and Typical Control Strategies for Multichannel Active Noise Control

Chu

Sun

et al. 2022

Applied Sciences

Self Cite

View full text Add to dashboard Cite

Active noise control (ANC) systems usually involve a large number of loudspeakers and error microphones in order to achieve noise reduction over an extended region of space. Although fundamentals of ANC theory and principles of ANC methods have been well-established over the past 40 years, applications of this technology are facing new challenges. A larger quiet zone with better noise reduction performance is always desirable in a variety of real-life scenarios. This paper presents several important factors that affect the performance of multichannel ANC systems in some popular applications such as windows with natural ventilation and quiet-zone around heads. The factors affecting acoustic design include the reflection of a baffle plate, arrangement of error sensors in open areas, and so on. In addition, different control strategies are compared and analyzed, including centralized, decentralized, and distributed strategies. All these strategies are discussed from the signal processing side, which should be considered after a proper acoustic design. One of the important aims of this paper is to provide practical guidance for acoustic design and discuss several typical control strategies for multichannel ANC systems.

show abstract

Section: Decentralized Controlmentioning

confidence: 99%

Section: Decentralized Controlmentioning

confidence: 99%

Some Practical Acoustic Design and Typical Control Strategies for Multichannel Active Noise Control

Chu

Sun

et al. 2022

Applied Sciences

Self Cite

View full text Add to dashboard Cite

show abstract

“…The method has been successfully tested for a solar power satellite. In Yu et al, 20 there was proposed a decentralized controller to mitigate the vibration of a plate. The control functions are derived based on the method of virtual absorbed energy, which enables establishing an optimal gain in the local velocity feedback control.…”

Section: Introductionmentioning

confidence: 99%

Decentralized semi‐active structural vibration control based on optimal system modelling

Pisarski

Szmidt

Konowrocki

2020

Struct Control Health Monit

View full text Add to dashboard Cite

The problem of decentralized semi-active stabilization of vibration of a beam structure is studied. The decentralized controller's architecture is attained by means of optimal system modelling. In this approach, based on a specially designed and optimized set of basis functions, the solution to the continuous Euler-Bernoulli beam equation is approximated by a discrete system, where the mass and stiffness matrices ensure that the assumed stabilizing control law can be operated by using solely the local state information. The performance of the method is examined through numerical experiments for a series of free-vibration scenarios with comparison to competitive decentralized and centralized control strategies. The performance impact of the selection of the parameters of the optimal system model is also studied. The designed method allows practical modular arrangements of the control system and is applicable to large-scale structures.

show abstract

Reducing Stress Concentration Around a Hole in a Plate Subjected to Biaxial Tension

Allahyari

Golabi

2019

Iran J Sci Technol Trans Mech Eng

View full text Add to dashboard Cite

Experimental validation of virtual absorbed energy of piezoelectric patch actuators in decentralized velocity feedback control of a plate

Cited by 6 publications

References 23 publications

Some Practical Acoustic Design and Typical Control Strategies for Multichannel Active Noise Control

Some Practical Acoustic Design and Typical Control Strategies for Multichannel Active Noise Control

Decentralized semi‐active structural vibration control based on optimal system modelling

Reducing Stress Concentration Around a Hole in a Plate Subjected to Biaxial Tension

Contact Info

Product

Resources

About