Exploring the Potential of Promising Sensor Technologies for Concrete Structural Health Monitoring

Abstract

Structural health monitoring (SHM) is crucial for maintaining concrete infrastructure. The data collected by these sensors are processed and analyzed using various analysis tools under different loadings and exposure to external conditions. Sensor-based investigation on concrete has been carried out for technologies used for designing structural health monitoring sensors. A Sensor-Infused Structural Analysis such as interfacial bond-slip model, corroded steel bar, fiber-optic sensors, carbon black and polypropylene fiber, concrete cracks, concrete carbonation, strain transfer model, and vibrational-based monitor. The compressive strength (CS) and split tensile strength (STS) values of the analyzed material fall within a range from 26 to 36 MPa and from 2 to 3 MPa, respectively. The material being studied has a range of flexural strength (FS) and density values that fall between 4.5 and 7 MPa and between 2250 and 2550 kg/m3. The average squared difference between the predicted and actual compressive strength values was found to be 4.405. With cement ratios of 0.3, 0.4, and 0.5, the shear strength value ranged from 4.4 to 5.6 MPa. The maximum shear strength was observed for a water–cement ratio of 0.4, with 5.5 MPa, followed by a water–cement ratio of 0.3, with 5 MPa. Optimizing the water–cement ratio achieves robust concrete (at 0.50), while a lower ratio may hinder strength (at 0.30). PZT sensors and stress-wave measurements aid in the precise structural monitoring, enhanced by steel fibers and carbon black, for improved sensitivity and mechanical properties. These findings incorporate a wide range of applications, including crack detection; strain and deformation analysis; and monitoring of temperature, moisture, and corrosion. This review pioneers sensor technology for concrete monitoring (Goal 9), urban safety (Goal 11), climate resilience (Goal 13), coastal preservation (Goal 14), and habitat protection (Goal 15) of the United Nations’ Sustainable Development Goals.