Fabrication of high aspect ratio TiO2 and Al2O3 nanogratings by atomic layer deposition

Abstract

Articles you may be interested inThe authors report on the fabrication of TiO 2 and Al 2 O 3 nanostructured gratings with an aspect ratio of up to 50. The gratings were made by a combination of atomic layer deposition (ALD) and dry etch techniques. The workflow included fabrication of a Si template using deep reactive ion etching followed by ALD of TiO 2 or Al 2 O 3 . Then, the template was etched away using SF 6 in an inductively coupled plasma tool, which resulted in the formation of isolated ALD coatings, thereby achieving high aspect ratio grating structures. SF 6 plasma removes silicon selectively without any observable influence on TiO 2 or Al 2 O 3 , thus revealing high selectivity throughout the fabrication. Scanning electron microscopy was used to analyze every fabrication step. Due to nonreleased stress in the ALD coatings, the top parts of the gratings were observed to bend inward as the Si template was removed, thus resulting in a gradual change in the pitch value of the structures. The pitch on top of the gratings is 400 nm, and it gradually reduces to 200 nm at the bottom. The form of the bending can be reshaped by Ar þ ion beam etching. The chemical purity of the ALD grown materials was analyzed by x-ray photoelectron spectroscopy. The approach presented opens the possibility to fabricate high quality optical metamaterials and functional nanostructures.

Microfabricated Air-Core Toroidal Inductor in Very High-Frequency Power Converters

“…After depositing insulation layers including aluminum oxide (Al 2 O 3 ) and silicon dioxide (SiO 2 ), copper is electroplated into the TSVs and on both wafer sides. The aluminum oxide (Al2O3) is deposited by atomic layer deposition (ALD) using a process developed for depositing Al2O3 on high-aspect-ratio structures [40]. Third, an etching mask is created prior to removal of the silicon core.…”

Laguerre-Gauss beam generation in IR and UV by subwavelength surface-relief gratings

“…To form the trenches of the structures, a thin film of TiO 2 was deposited using the ALD technique in a hot-wall system (Picosun R200), working with 2000 cycles at 150 • C [ Fig. 3(d)] [31]. The precursors used were titanium tetrachloride (TiCl 4 ) and H 2 O (supplied by Strem Chemicals Equipment).…”

Towards sub-micrometer high aspect ratio X-ray gratings by atomic layer deposition of iridium

“…Here, we propose and demonstrate the production of high aspect ratio (> 50) iridium gratings with a period of one micrometer and a depth of 30 µm combining deep reactive ion etching (RIE) of silicon and atomic layer deposition (ALD) of iridium [13]. Until now, ALD processes have been successfully applied to conformally deposit oxide layers on high aspect (> 180) nanostructures [14,15] and ALD metal coatings have also been proven very effective to fabricate high resolution diffractive X-ray optics in the sub-100 nm structure size range [16,17]. In this work, we performed 3 a thorough optimization of the ALD recipe to extend the conformal metal coating to trench depths of tens of micrometers while keeping the one micrometer grating periodicity.…”