Fabrication of high thermal stable cured novolac/Cloisite 30B nanocomposites by chemical modification of resin structure

Abstract

Cloisite 30B as a modified kind of nanoclay was utilized for the formation of 3D network based on novolac resin with high thermal stable properties. Two types of phenolic resins including neat novolac (NR) and modified novolac resin were used to create a compatible matrix with nanoclay. For this purpose, NR modified with (3chloropropyl)triethoxysilane (CPTES) to form SiNR. For improvement of thermal behaviors, Cloisite 30B was dispersed in matrix via ultrasonic waves and cured with hexamethylenetetramine (HMTA) to form 3D network. X-ray diffraction (XRD) analysis was used to measure the d-spacing in intercalated systems and results indicated the optimum amount of clay for appropriate thermal properties. Investigation of the thermal properties of the samples by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) showed that the presence of Cloisite 30B in matrix resulted in much higher thermal stability and char yield with respect to modification of novolac resin originated from formation of 3D Si-O-Si network. Also, cured modified resin and its nanocomposites showed much higher thermal stability than cured NR and its nanocomposites. Such nanocomposite materials with high thermal stability have potential applications in advanced fields such electronic, industrial molds, coatings, adhesives, and aerospace composites.