Facile preparation of all cellulose composite with excellent mechanical and antibacterial properties via partial dissolution of corn-stalk biomass

Properties of polyamide epichlorohydrin resin‐modified wood fibers/soybean straw powder copolymerization enhanced soy protein biomass composites

“…From the above data, it can be seen that the increase in density can improve the comprehensive performance of biomass composites. When the theoretical density is 0.80 g/cm 3 , the performance of biomass composites already meets the relevant technical requirements of automotive interior parts; although the comprehensive performance of the material is greatly improved when the theoretical density is increased from 0.80 g/cm 3 to 0.85 g/cm 3 , for the consideration of reducing production cost and lightweight design, the theoretical density of 0.80 g/cm 3 is chosen for the manufacture and application of automotive interior parts. The application is sufficient.…”

“…Biomass composites with good mechanical properties and water resistance were prepared using soybean straw powder and poplar wood fibers as raw materials and prepress, followed by hot molding. At a theoretical density of 0.80 g/cm 3 , the actual density of the biomass composites was 0.90 g/cm 3 , with a tensile strength of 22.04 MPa and a bending strength of up to 44.92 MPa; At the same time, biomass composites have good water resistance, which can meet the technical requirements of automotive interior parts and replace the traditional plastic interior parts. The biomass composites are made from crop straw and wood chips, a by-product of the wood processing industry, to improve its additional utilization value and achieve high utilization of resources.…”

“…Experiments A, B, C, and D investigated three different straw meal species (i. e., soybean straw powder, wheat straw powder, and rice straw powder), five different ratio of poplar wood fibers (i. e., 0, 25 %, 50 %, 75 %, and 100 %), five different particle sizes of soybean straw powder (i. e., 20 mesh to 40 mesh, 40 mesh to 60 mesh, 60 mesh to 80 mesh, 80 mesh to 100 mesh and 100 mesh to 120 mesh) and five different theoretical densities (i. e., 0.65 g/cm 3 , 0.70 g/cm 3 , 0.75 g/cm 3 , 0.80 g/cm 3 , and 0.85 g/cm 3 ) on the properties of the biomass composites. The theoretical density of the biomass composites prepared from the experiments in groups A, B, and C were all 0.70 g/cm 3 .…”

“…The development of environmentally friendly biomass composites to partially replace synthetic polymers has become a research direction for many researchers [2]. Sustainable and renewable natural or biobased polymeric materials such as cellulose, lignin, and protein, sourced from wood and agricultural waste such as crop straw, may be ideal for environmentally friendly biomass composites [3][4].…”

Integrated Hemicellulose Extraction and Papermaking Fiber Production from Agro-Waste Biomass

“…The opportunities for CS valorization are expanded by the contemporary management strategies (CE, ZW). Nowadays, CS residues may be recycled to produce cellulose/epoxy resin composites [23], cellulose nanofibrils [24], cellulose composites [25], carbonaceous composite adsorbents [19], levulinic acid and biocarbon electrode material [26], second-generation bioethanol [27], biomethane [28], chemical pulp [29] and various biomaterials (plastics, hydrogels, fibers, composites) [30]. The use of agricultural waste biomass as fillers in different bio-composites [31], bio-plastics, tires [32], and other reinforced polymers [33,34] is one of the most promising directions to its conversion into value-added goods [34].…”