Factors influencing power consumption and power-saving measures in ESR process

Abstract

Since the USA patent of electroslag remelting (ESR) metallurgy was held by P. K. Hopkins in 1940, the ESR technology has now entered a relatively mature stage after a 70-year history of development. At present, the annual capacity of ESR steels around the world is approximately 2 million tonnes. ESR metallurgy emerged in China in 1958. Since then, electroslag furnaces were gradually installed in Chinese special steel plants. At present, there are more than 200 electroslag remelting furnaces in the metallurgical workshops of these steel plants with an annual production capacity of about 500,000 tonnes of ingots and components made of about 200 varieties of steels, including high quality steels and superalloys. This ESR technology is used as a special remelting and refining method for producing high quality steels and superalloys. However, traditional ESR technology has the disadvantages of environmental pollution and extremely high specific power consumption. High power consumption restricts, to a certain degree, the competitiveness of ESR steels in the marketplace. The measures of power saving in ESR have been researched in recent years. In this paper, some factors influencing power consumption, such as filling ratio, slag system, slag amount, melting rate and furnace structure are reviewed, and several new ESR technologies for power saving are proposed.

Effect of the Slag Composition on the Process Behavior, Energy Consumption, and Nonmetallic Inclusions during Electroslag Remelting

“…[ 2,10 ] Other factors such as fill ratio and the amount of slag, or the melt rate can also have a strong effect. [ 4,8,11–16 ]…”

“…[1][2][3][4][5][6][7] Rising requirements regarding sustainability, emission control, and environmental protection have triggered new awareness for this topic. [4,8,9] Besides plant geometry and design, the customarily CaF 2 -based slag plays the key role in the heat generation and energy consumption of ESR. Key properties are the melting point as well as the electrical and thermal conductivity.…”

“…[2,10] Other factors such as fill ratio and the amount of slag, or the melt rate can also have a strong effect. [4,8,[11][12][13][14][15][16] According to Holzgruber, [16] rising fill ratios up to 0.4 lead to a reduction in specific energy consumption due to a better heat transfer into the electrode and less radiation losses at the free slag surface. A further increase in fill ratio surprisingly resulted in a reversed trend due to changing immersion depths.…”