Finding the boom: Phased array processing applied to sonic boom direction of arrival estimation

Abstract

, 73 supersonic passes of an F-18 aircraft were observed over a dry lake bed at Edwards Air Force Base as part of NASA's Farfield Investigation of No-boom Thresholds project, which was conceived to measure the characteristics of sonic booms at the boundaries of their decay, where overpressure is exceptionally low, thereby stretching the limits of current prediction methods. Each pass was recorded by a 55-microphone phased array sensor system with a circular aperture diameter of 2000 ft (609.6 m). The data were processed using a novel time domain array processing algorithm to estimate the direction of arrival and trace speed of the sonic boom wave front along the plane of the phased array. The results from the phased array processing are consistent with the known location of the test aircraft for each processed flight and are consistent with expectations for direction of arrival due to atmospheric refraction. Near real-time estimation of the sonic boom direction of arrival, trace speed along the ground, and visualization of the propagation of the sonic boom wave front are possible. This could allow the test team to assess the data and determine if the target of the test point has been met while the test aircraft is still in flight. This would enable improved test efficiency and efficacy, ultimately improving the value of the test campaign. The measured direction of arrival also provides sonic boom propagation numerical prediction code validation. Most sonic boom prediction codes provide the propagation path of the sonic boom and thus the direction of arrival of the sonic boom at a point on the ground. Thus for predictions made