Finite Element Methods for Multi-objective optimization of a High Step-up Interleaved Boost Converter

Abstract

High step-up converters have been widely used in renewable energy systems and, recently, in automotive applications, due to their high voltage gain capability. In these applications, efficiency and high-power density are usually required, although these characteristics are commonly opposite objectives. Therefore, a multi-objective optimization is quite useful in order to comply with both requirements of high efficiency and small size. In that sense, the Finite Element Method can be effective to complement optimization methods. This paper presents a procedure to optimize the efficiency and the volume of a high step-up converter that utilizes a coupled inductor with three windings installed in only one core. This optimization procedure is carried out using 3D and 2D Finite Element Method simulations. In this procedure, a complete modeling of power losses, size, and flux density is evaluated by comparing different materials and dimensions. The results of this modeling stage are introduced into a multi-objective optimization algorithm to obtain a Pareto front. Finally, the optimization methodology is validated by experimental tests.

Common Mode Noise Analysis for a High Step-Up Converter with GaN Devices

“…This converter can operate in four different modes of operation depending on the duty ratio of switches [18]. Current waveforms for all modes of operation are presented in During Mode 1, switch S1 is switched ON and S2 is switched OFF.…”

Automatic Data Extraction Based on Semiconductor Datasheet for Design Automation of Power Converters

“…With the development of decarbonized systems, such as electric cars, electric aviation, and photo-voltaic system, the demand for power electronic converters has increased significantly due to their widespread applications [1]. Increasingly strict requirements for the design of power converters in terms of efficiency, power density, volume, and mass are proposed [2].…”

“…In comparison to standard academic papers, data-sheets have several distinguishing characteristics. (1) There are intensive figures on some pages. (2) Some figures are in grayscale while others are in color.…”