Flow quality improvement of the wind tunnel testing for a highly-loaded compressor cascade at high incidence

Abstract

To obtain reliable and accurate experimental data in cascade testing, the influencing factors and the improving method of the flow quality of a highly-loaded compressor cascade under high incidence were investigated through a series of numerical simulations and experiments. The numerical method was validated by experimental data and agreed well at both incidence angles of 0° and 6°. Under the original upper end wall, both experimental and numerical results indicated an unsatisfactory flow quality of the cascade with an obvious nonuniformity of inlet Mach number, and the incidence of the central blade is 3.6° larger than the theoretical value. Using a small curved upper wall can reduce the severe flow separation on the upper wall and achieve a maximum improvement in flow quality under the critical installation angle, where the incidence deviation of the central blade was reduced to 2.1°. Using the combination of adjustable tailboards and a small curved upper end wall can further improve the cascade flow quality. Under the optimal angle of the tailboards, both the inflow uniformity and the outflow periodicity of the three middle blade passages the test requirements, and the incidence deviation of the central blade is reduced to 0.2°.