Flow Resistance Coefficients of Porous Brush Seal as a Function of Pressure Load

Abstract

Developments in brush seal analyses tools have been covering advanced flow and structural analyses since brush seals are applied at elevated pressure loads, temperatures, surface speeds, and transients. Brush seals have dynamic flow and structural behaviors that need to be investigated in detail in order to estimate final leakage output and service life. Bristles move, bend, and form a grift matrix depending on pressure load. The level of pressure load determines the tightness of the bristle pack, and thus, the leakage. In the computational fluid dynamics (CFD) analyses of this work, the bristle pack is treated as a porous medium. Based on brush seal test data, the flow resistance coefficients (FRC) for the porous bristle pack are calibrated as a function of pressure load. A circular seal is tested in a static test rig under various pressure loads at room temperature. The FRC calibration is based on test leakage and literature-based axial pressure distribution on the rotor surface and radial pressure distribution over the backing plate. The anisotropic FRC are treated as spatial dependent in axisymmetrical coordinates. The fence height region and the upper region of bristle pack have different FRC since the upper region is supported by backing plate, while bristles are free to move and bend at the fence height region. The FRC are found to be almost linearly dependent on the pressure load for investigated conditions. The blow-down is also calculated by incorporating test leakage and calibrated FRC.

Fluid Dynamic Behavior of Conventional and Pressure Relieving Brush Seals

“…Further analysis of brush seal behaviour using porous medium models was carried out in studies by Doğu et al [22] [15] [23]. The complexity of the calculations heightened through the subsequent studies, with rotational motion accounted for and resistance coefficients calibrated as a function of applied pressure load in the most recent works.…”