The multi-stage temporary plugging and diverting fracturing technique stands as a pivotal method for enhancing production in tight oil reservoirs. At present, fracture propagation models in temporary plugging and diverting fracturing primarily focus on single-stage temporary plugging, disregarding intricate mechanisms influenced by multi-stage temporary plugging and inter-fracture interference on the redirection and propagation of artificial fractures. To address this gap, this study employs the extended finite element method and establishes a mechanical model for the propagation of multi-stage temporary plugging fractures in tight oil reservoirs based on the maximum circumferential stress criterion. Relevant numerical simulations are conducted, considering key factors such as horizontal stress differences, fracturing fluid viscosity, injection rate, and initial fracture angle, all of which influence the morphology of diversion fracture propagation. The study rigorously analyzes and compares characteristics such as the radius of diversion fractures, diversion angle, and fracture width profile corresponding to different numbers of temporary plugging stages. Numerical simulations reveal that the primary controlling factor influencing the extension of fractures is the horizontal stress difference. A smaller horizontal stress difference makes fracture diversion easier, resulting in larger redirection radii. The impact of fracturing fluid viscosity on the diversion radius and diversion angle of fractures can be deemed negligible. Larger injection rates during construction facilitate easier diversion, leading to larger diversion radii. Furthermore, when the initial fracture angle exceeds 90°, the diversion radius of fractures is significantly larger compared to cases where the initial fracture angle is less than 90°, indicating a more facile diversion of fractures.
