Frequency and Time Domain Responses of Cross-Bonded Cables

Lafaia, Isabel; Mahseredjian, Jean; Ametani, A.; Barros, Teresa Correia de; Koçar, Ilhan; Fillion, Yannick

doi:10.1109/pesgm.2018.8585935

Cited by 1 publication

(1 citation statement)

References 0 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…These methods are mainly used for short-distance single-ended or double-ended grounding power cables. They are not applicable at 110 kV or above the voltage levels of cross-connected high-voltage cables; this limits the amount of research on the online monitoring of the insulation status of high-voltage cables under cross-connection [10]- [12].…”

Section: Introductionmentioning

confidence: 99%

Insulation Monitoring and Diagnosis of Faults in Cross-Bonded Cables Based on the Resistive Current and Sheath Current

Zhu

Tian

et al. 2022

IEEE Access

View full text Add to dashboard Cite

To reduce the induction voltage in the metal sheath, cross-bonded grounding is a widely adopted method in long-distance high voltage power cables, but this introduces challenges to the online monitoring and diagnosis of cable insulation. An online monitoring and diagnosis method for cable insulation based on the analysis of resistive current is proposed in this paper. A theoretical formula for the separation between leakage current and sheath current was derived, and a theoretical formula for the separation between resistive current and leakage current was obtained. An equivalent circuit of a three-phase long distance cable was established using the MATLAB/Simulink platform. The simulation was used to model three typical faults: cable insulation deterioration, open sheath circuit faults, and the sheath breakdown of intermediate joint faults. The results show that the method can be used to monitor each cable's insulation state under metal sheath cross-bonded, and it also can determine the open sheath circuit faults and fault joint location using the measured current values by the corresponding current sensors increases significantly. Based on the analyses, diagnostic criteria are established for different types of cable faults and fault locations.INDEX TERMS Long distance power cable, cross-bonded, resistive current, leakage current, sheath current, fault diagnosis.

show abstract

Section: Introductionmentioning

confidence: 99%