“…Correspondingly, the quantity representing distance in these equations, either the dimensionless x of equation ( 7) or the dimensional x of equation ( 9), cannot take the value of zero, as is implied by the computations leading to equation ( 8) on page 990 and in the steps performed on examples 2 and 3 on page 993 of the article.In fact, if one considers the interacting bodies as rigid spheres and representing by R T , R M and R S respectively the radius of the Earth, the Moon and the Sun, the lowest value that the dimensional x can take in equation ( 9) is x = (R T + R M ) (interaction Earth-Moon) or x = (R T + R S ) (interaction Earth-Sun). Moreover, the fact that x cannot be zero released the speed of the falling body, in equation ( 6), from taking an infinite value.Nevertheless, when the aforementioned corrections are implemented, the obtained numerical values are very close to the ones reported in the article [1]. Specifically, using the values R T = 6.378 × 10 3 Km, R M = 1.738 × 10 3 Km, R S = 6.960 × 10 5 Km, and the numerical values provided in Foong's paper at the beginning of section 2.6, page 993, the results for the dimensional time, using either equation ( 9) or equation ( 7) and (10) in the paper, are shown in table 1 (computed as if each numerical value has four significant figures): the computed relative percent error indicates that both values are practically the same.…”