Geoelectrical characterisation of CO2–water systems in porous media: application to carbon sequestration

Abstract

Carbon sequestration is a promising method for the reduction of carbon dioxide (CO2) emissions as it permits the storage of compressed CO2 in the subsurface. The carbon sequestration sites must be monitored to detect potential leaks; one possible method involves the monitoring of geoelectrical properties such as electrical conductivity (σb) and dielectric constant (εb). This investigation focuses on using a time domain reflectometry (TDR) sensor to determine the influence of different factors on the measurements of the electrical conductivity (σb) and dielectric constant (εb) of a porous rock reservoir in relation to the soil water saturation (Sw). The factors investigated were presence of surfactant, salt concentration, pH and rock type which are unique to a given storage site. A number of dynamic two-phase flow experiments were performed using gaseous CO2. It was found that salt concentration, rock type and presence of a surfactant had a notable effect on the σb–Sw and εb–Sw relationships. Higher salt concentrations were found to give higher values for σb and εb for given Sw values. Limestone was found to result in the highest values of both σb and εb for any given Sw, followed by silica and basalt samples. The presence of a surfactant resulted in higher values for σb at higher Sw values and lower values for σb at lower Sw values compared to the case when no surfactant was present. Surfactant presence also resulted in lower values for εb at given Sw values. Initial pH values (with silica sand) were found to have no significant effect on the σb–Sw and εb–Sw relationships. The measurements of σb and εb indicate that the use of TDR presents a viable monitoring option. Furthermore, statistical analysis using non-linear regression was carried out on the experimental results and the model shows a good reliability in the prediction of the monitoring process in geological carbon sequestration.