The sedimentary clays of the Douala sub-basin (Cameroon) were studied to determine their mineralogical composition and physicochemical properties to boost their potential suitability as materials for traditional ceramics and eventually modern ceramics. These clayey materials are not widely used locally as building materials and little data are available on these materials in the field of ceramics and they are relatively unknown. Three profiles from 3.9 to 7.4 m thickness were studied on the field in order to determine their mineralogical (X-ray diffraction, infrared), chemical (X-ray fluorescence) and physicochemical (particle size, Atterberg limits, organic matter, cation exchange capacity and hydrogen potential) properties. Globally, ten (10) clay samples were analyzed to highlight the nature and technological properties of these clays. Mineralogically, kaolinite (48.3–69.2 wt.%) and quartz (20.5–41.2 wt.%) were the most abundant minerals in these raw clay materials. They were associated with a very small or moderate quantity of illite, hematite, goethite, feldspar, gibbsite and micas. Geochemically, the clayey materials had high silica (SiO2, 22.21–58.03%) and alumina (Al2O3, 12.84–22.94%) contents, with a significant amount of iron oxides (Fe2O3, 1.07–17.92%). Other oxides (K2O, MgO, TiO2, Na2O, MnO, CaO and P2O5) were in a relatively lower proportion. A high level of alumina content explains the kaolinitic nature of these clayey materials. The results of the granulometric analysis of the clayey materials showed the following distribution: clay (26–99%) followed by silt (1–70%) and sand (0–4%). This corresponds to silty clay soils according to the Belgian textural classification diagram, with high plastic index (63.9%) characteristics. The studied clay materials are good candidates for the production of ceramics and terracotta building. This study is therefore important for any application of this type of clay in various industrial fields.