Grinding Test on Tremolite with Fibrous and Prismatic Habit

Abstract

The main objective of this work is the evaluation of the morphology change in tremolite particles before and after a grinding process. The crushing action simulates anthropic alteration of the rock, such as excavation in rocks containing tremolite during a tunneling operation. The crystallization habit of these amphibolic minerals can exert hazardous effects on humans. The investigated amphibolic minerals are four tremolite samples, from the Piedmont and Aosta Valley regions, with different crystallization habits. The habits can be described as asbestiform (fibrous) for longer and thinner fibers and non-asbestiform (prismatic) for prismatic fragments, also known as “cleavage” fragments. In order to identify the morphological variation before and after the grinding, both a phase contrast optical microscope (PCOM) and a scanning electron microscope (SEM) were used. The identification procedure for fibrous and prismatic elements is related to a dimensional parameter (length–diameter ratio) defined by the Health and Safety Executive. The results highlight how mineral comminution leads to a rise of prismatic fragments and, therefore, to a potentially safer situation for worker and inhabitants.

Asbestos amphiboles: effects of comminution on tremolite and actinolite regulated and unregulated fibres

“…Chatfield 2018crushed by agate mortar and pestle the amphibole-containing material for TEM investigations (Transmission electron microscopy; ISO 13794 (1999)). In Baietto et al (2019), samples were ground in an agate jar closed with a sealing gasket lid (model number 952/2 from Humboldt-Wedag).…”

The Concentration of Asbestos Fibers in Bulk Samples and Its Variation with Grain Size

“…The type and duration of milling depend on the hardness of the material. Milling can transform the material [31,32] by modifying the size and therefore the number of asbestos fibers that are subsequently counted using microscopy techniques, or by altering the integrity of the crystalline structure that is detected using XRD [4,29]. Such constraints involve close attention during the milling phase regarding to its duration and the properties of the milled material.…”