Heat transfer correlations and pressure drop dynamics of palm fibre wetting media for evaporative cooling at different air flow rates

This study evaluates a solar PV-powered evaporative cooling system for vegetable cooling. The system features dual cooling chambers with two different biomass pads, operating at different temperatures. To assess its potential, the research examines the evolution of temperature and humidity of the cooling chamber, evaporative effectiveness, cooling capacity, coefficient of performance (COP), energy metrics, greenhouse gas emissions, and overall cost. The results show that the system achieved a temperature depression range of 0.22 to 5.2 °C and 0.57 to 10.94 °C for wood shavings and polyurethane foam, respectively, under no-load conditions, while the values were 0.79 to 4.7 °C and 1.22 to 9.88 °C, with average values of 3.09 and 7.0 °C, for the same materials under loaded conditions. Loaded conditions also yielded a cooling capacity of 5.7 to 33.93 W for wood shavings and 8.13 to 75.55 W for polyurethane foam. The cooling efficiency ranged from 19.9 to 96.42% for polyurethane foam and 3.62 to 60% for wood shavings. The system’s COP was higher than that of solar-powered mechanical chillers, ranging from 2.37 to 22.92. The energy production factor was 2.3 to 2.4, with a lifecycle conversion efficiency of 0.5 and an energy payback time of 1.1 and 2.2 years for using polyurethane foam and wood shavings, respectively. The net present value was positive, and the levelized cost of energy was low, at 36.7 to 38.3 NGN/kWh (0.043–0.045 USD/kWh), making it a viable alternative to grid-based energy systems in Nigeria. Additionally, the system offers significant CO2 mitigation potential, with estimated carbon credits of NGN 65,059 (USD 71.56) and NGN 98,576.49 (USD 108.43) over its lifetime.

show abstract

scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.

Contact Info

customersupport@researchsolutions.com

10624 S. Eastern Ave., Ste. A-614

Henderson, NV 89052, USA

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Blog Terms and Conditions API Terms Privacy Policy Contact Cookie Preferences Do Not Sell or Share My Personal Information

Made with 💙 for researchers

Part of the Research Solutions Family.

Heat transfer correlations and pressure drop dynamics of palm fibre wetting media for evaporative cooling at different air flow rates

Cited by 3 publications

References 28 publications

Capillary container array structures for efficient, energy-saving, and sustainable evaporative cooling and humidification

Capillary container array structures for efficient, energy-saving, and sustainable evaporative cooling and humidification

Evaporative cooling with a wet fabric blanket for non-refrigerated horticultural produce transport: An experimental study

Development of a Small Dual-Chamber Solar PV-Powered Evaporative Cooling System for Fruit and Vegetable Cooling with Techno-Economic Assessment

Contact Info

Product

Resources

About