Heat transfer enhancement in the novel wavy shaped heat exchanger channel with cylindrical vortex generators

The heat transfer and the hydraulic performance of laminar flow using water–CuO nanofluid and pure water in smooth and complex channels with embedded hollow half‐spheres are numerically studied over a range of Reynolds numbers. Pure water is first used as the coolant for all selected configurations, followed by low‐volume fractions (3% and 5%) of water–CuO nanofluid in the optimal configuration. Three configurations are evaluated by varying the number and diameter of the opposing half‐spheres. The results show that the heat transfer coefficient for microchannels with half‐spheres increases, reaching up to 3.5 times that of smooth microchannels. Additionally, within the same Reynolds number range, the friction factor increases by up to 50%. The use of nanofluids results in a 6% and 14% increase in the heat transfer coefficient for concentrations of 3% and 5%, respectively, compared with pure water. These enhancements are directly correlated with the increase in thermal conductivity of the nanofluids relative to water.

show abstract

Numerical investigation of thermo-hydraulic performance of perforated rectangular and sinusoidal vortex generators in a double-pipe heat exchanger

Wang,

Foo,

Tran

et al. 2024

J Therm Anal Calorim

View full text Add to dashboard Cite

Vortex generators (VGs) are utilized in heating and cooling systems to enhance heat transfer efficiency for energy savings. This study investigates the thermo-hydraulic performance of using the rectangular vortex generators (RVG) and the sinusoidal vortex generator (SVG) with and without holes on the annular side of a double-pipe heat exchanger (DPHE) for turbulent regimes. The numerical analysis is conducted for different angles of attack (α) (15°, 45°, and 75°) and spacings between VGs (60, 100, and 300 mm). By comparing the heat transfer behavior for a given α, the RVG cases present a higher heat transfer when compared to the SVG cases, with an exception for the 15° case. The configuration with a low α and slight curvature augments flow velocities and vortex strength, thereby enhancing heat transfer efficiency. Moreover, the 15° SVGs-hole case demonstrates a higher Nusselt number compared to the no-hole case. Adding holes in the VG significantly reduces the pressure drop for the 45° and 75° cases, while it remains the same at the 15° case. Additionally, the 75° RVG case yields the highest Nusselt number among the studied cases, with an enhancement of 42.4% when compared to the smooth pipe at the Reynolds number of 5,711. The best performance evaluation criterion (PEC) is achieved by the 15° SVGs-hole case. When the effect of different spacings is examined, the spacing of 60 mm provides the highest PEC of 1.22. In short, the present study provides valuable insights for optimizing VG design and enhancing overall system performance in DPHEs.

show abstract

Heat transfer enhancement in the novel wavy shaped heat exchanger channel with cylindrical vortex generators

Cited by 17 publications

References 34 publications

Recent Innovation in Heat Transfer Enhancement Techniques

Recent Innovation in Heat Transfer Enhancement Techniques

Numerical Study of Fluid Flow and Heat Transfer in Rectangular Microchannel Equipped With Hollow Hemispheres

Numerical investigation of thermo-hydraulic performance of perforated rectangular and sinusoidal vortex generators in a double-pipe heat exchanger

Contact Info

Product

Resources

About