Heat Treatment of Wear Resistant Steels for Drilling Rig Pumps

Abstract

The influence of heat treatment different options on wear resistance of steels of trademarks Kh12MFL and 150KhNML applied in manufacturing of mud pumps is reviewed. It is shown that the steel Kh12MFL is superior in wear resistance than the steel 150KhNML at abrasion. The martensite-carbide structure of both steels obtained at quenching at normal temperatures, from 900 to 1000 0С, ensures a good hardness (61-64 HRC). The analysis of the residual austenite contents influence on wear resistance was also made. It was determined that residual austenite formed after high temperature quenching (110-1170 0С) was metastable and had a tendency to transform into carbon containing martensite of deformation in the process abrasive wearing. This allowed steels to have a maximum wear resistance because of ensuring a high ability to frictional hardening of the working surface.

The Influence of Thermal Processing on the Structure and Wear-Resistance of Perlite-Class Steels

“…2) обес-печивает высокую твердость (61 HRC). Однако максимальная износостойкость при абразивном изнашивании достигается после высокотемпературной закалки стали (1100÷1175 °С), формирующей мартенситно-карбидную структуру с метастабильным аустенитом в количестве 10-15 % и высокой способностью к фрикционному упрочнению [15][16][17][18][19][20].…”