High Frequency Land Backscatter Coefficients Over Northern Australia and the Effects of Various Surface Properties

Abstract

Over-the-horizon radars (OTHRs) utilize the refractive properties of the ionosphere to illuminate targets beyond the Earth's horizon. Consequently, the performance of this type of radar is highly dependent on the ionosphere. Reliable models of the radar ground backscatter are required to accurately assess the ionospheric propagation conditions and, thus, the expected performance of OTHRs. The ground backscatter coefficient characterizes the amount of radiation scattered back from a surface toward a receiver per unit area. While the backscatter coefficient of the sea is well understood and may be calculated from theory if the sea state is known, the backscatter coefficient of land at high frequencies is not well understood. To calculate the land backscatter coefficients over Northern Australia, a methodology that compares observed backscatter ionograms to those synthesized using high-frequency (HF) radio wave raytracing techniques through model ionospheres was developed. Maps of the backscatter coefficients across Northern Australia were produced. The effects of surface properties, including topography, soil moisture, and vegetation cover on the backscatter coefficients, were investigated. A weak positive correlation between the backscatter coefficient and the soil moisture and surface roughness was observed; however, it was found that the vegetation had the largest effect on the backscatter coefficient.