The three-dimensional visualization of cerebral cells is a challenging task. The human brain with a weight of about 1 kg contains around 10 12 cells. Currently, brain cells are imaged by optical and electron microscopies. These imaging techniques yield only information on surface-near regions and volumes restricted to cubic micrometers. In the last decade, the tissue preparation and high-resolution hard X-ray tomography has been advanced to reveal individual unstained cells in cubic millimeter brain volumes [1,2] with phase contrast. More recently, sufficient contrast for cell imaging in single distance propagation mode [3] or even with lab-based conventional approaches [4] was obtained by embedding brain specimens in paraffin. This allows improving the spatial resolution from the regime of grating interferometry, limited by the grating period, usually in the range of a few micrometers, to subcellular length-scales. Such data lend themselves for (semi-)automatic cellular und subcellular structure segmentation. Several thousand Purkinje cells were visualized and segmented within a ~40 mm 3 cerebellum specimen. Individual dendritic trees of Purkinje cells were visualized from the same specimen with higher resolution scans.The cerebellum was excised from a donated body of a 73-year old male in accordance with the Guidelines of the Ethical committee Northwestern Switzerland. It was embedded in paraffin following fixation in 4% histological-grade buffered formalin and dehydration in ethanol. Two cylinders with diameters 2.6 and 6.0 mm were cut from the paraffin blocks by means of hollow punches. Singledistance propagation phase contrast micro computed tomography was performed at the beamlines ID19 (European Synchrotron Radiation Facility, Grenoble, France) and Diamond Manchester Imaging Branchline I13-2 (Diamond Light Source, Didcot, UK) in local mode. Measurements at ID19 were performed with pink beam with a mean photon energy of 19.45 keV at 1.75 µm pixel length. 2004 equiangular projections were acquired over 360° with a FReLoN 2K CCD camera with 1 s exposure per projection after 80 cm propagation distance. At I13-2, 19 keV monochromatic beam energy and 0.45 µm pixel length were used. Projections were acquired with a pco.4000 camera (PCO AG, Kelheim, Germany) with 8 s exposure time at 2400 equiangular steps over 180° and 5 cm propagation distance. Phase retrieval was performed with the algorithm proposed [5] and implemented in the software package ANKAphase [6]. Reconstruction of the tomographic volumes was performed with the filtered backprojection routine implemented in MATLAB R2014b (Simulink, The MathWorks, Inc., USA). After tomographic measurements, the specimens were re-embedded into larger paraffin blocks for histological