High stability in color chromaticity of warm White emitting Diode with Dual-Hue SrSi2O2N2:Eu2+,Yb2+ Oxynitridosilicate Phosphorus

Abstract

<span>In this study, we analyzed and developed a phosphor with a nitridiosilicate based and emitting color changing from green to orange to apply to our white-light-emitting diodes (WLEDs). Eu<sup>2+</sup> and Yb<sup>2+</sup> trap sites of two-doped SrSi<sub>2</sub>O<sub>2</sub>N<sub>2</sub>:Eu<sup>2+</sup>,Yb<sup>2+</sup> (SrYb) nitridosilicate emit a wide emission in the region between green and orange. Through calculating the decompose time of the green-emission power donor, we could determine the converted energy between the active ions. Furthermore, we also analyzed the impact of co-doping with varied active ion ratios on the photoluminescence (PL) characteristics. As the concentration of Yb<sup>2+</sup> increases, the red emission dominates the green. This was because the obtained phoshor's emission depended on the activator ion components. To generate white light, a combination of the acquired phosphor and the InGaN blue LED chip with a 450 nm wavelength was used. With only two steps, we could detect the hue balance management. Firstly, by modifying the Eu<sup>2+</sup> and Yb<sup>2+</sup> concentration, we can conduct a green-to-orange proportion optimization. Following that, the commission onillumination (CIE) coordinates were transformed to [0.4071; 0.3789] from the original position, which was [0.2805; 0.2014] by enhancing the phosphor powder amount. An environment which has a CRI of around 89 is the optimum condition for conducting white light.</span>