High thermal conductivity and ultrahigh thermal boundary conductance of homoepitaxial AlN thin films

Abstract

Wurtzite aluminum nitride (AlN) has attracted increasing attention for high-power and high-temperature operations due to its high piezoelectricity, ultrawide-bandgap, and large thermal conductivity k. The k of epitaxially grown AlN on foreign substrates has been investigated; however, no thermal studies have been conducted on homoepitaxially grown AlN. In this study, the thickness dependent k and thermal boundary conductance G of homoepitaxial AlN thin films were systematically studied using the optical pump–probe method of frequency-domain thermoreflectance. Our results show that k increases with the thickness and k values are among the highest reported for film thicknesses of 200 nm, 500 nm, and 1 μm, with values of 71.95, 152.04, and 195.71 W/(mK), respectively. Our first-principles calculations show good agreement with our measured data. Remarkably, the G between the epilayer and the substrate reported high values of 328, 477, 1180, and 2590 MW/(m2K) for sample thicknesses of 200 nm, 500 nm, 1 μm, and 3 μm, respectively. The high k and ultrahigh G of homoepitaxially grown AlN are very promising for efficient heat dissipation, which helps in device design and has advanced applications in micro-electromechanical systems, ultraviolet photonics, and high-power electronics.

High Thermal Conductivity of Submicrometer Aluminum Nitride Thin Films Sputter-Deposited at Low Temperature

“…Further obscuring these relationships is the interplay of throw distance and ion mean free path, which itself is dependent upon a combination of pressure, applied power, and magnetic configuration of the 18,19,29,34,36−42 In (b), diamond symbols are single-crystal samples: Slack 43 (black), Rounds 44 (red), and Xu 16 (blue). Square symbols are for polycrystalline films: Kuo 19 (orange), Jacquot 45 (light blue), Zhao 36 (purple), Choi 37 (red), Pan 39 (cyan), Aissa 40 (pink), Duquenne 38 (green), Alvarez-Escalante (light green), 42 Bian 41 (dark green), Yalon 29 (black), Cheng 18 (yellow), Koh 20 (brown), and Bellerk 46 (magenta). Round symbols correspond to amorphous thin films: Zhao 36 (purple) and Gaskins 34 (black).…”

A Critical Review of Thermal Boundary Conductance across Wide and Ultrawide Bandgap Semiconductor Interfaces

“…For better thermal management, high-thermal-conductivity materials such as SiC and diamond can be used as the substrate. More recently, the growth of AlN has reached a maturity, making it another promising substrate candidate. − …”

Non‐Linear Optics at Twist Interfaces in h‐BN/SiC Heterostructures

“…Cross-Plane Thermal Conductivity: The cross-plane thermal conductivity k ⊥ was measured using the optical pump-probe method of FDTR. [64,65] An FDTR system was implemented with two continuous-wave lasers: a 488 nm pump and a 532 nm probe (Figure S8, Supporting Information). The vertically polarized pump beam first travels through an optical isolator.…”