Highly active Pt3Rh/C nanoparticles towards ethanol electrooxidation. Influence of the catalyst structure

Abstract

The electrochemical oxidation of ethanol results in the formation of strongly adsorbed intermediates. Pt-Rh catalysts are proposed as alternatives since they easy the CC bond breaking. However, the effect of the Pt-Rh structure on the catalytic activity and selectivity to CO2 is not well understood. Here, we synthesised Pt/C and two different Pt-Rh/C catalyst architectures, an alloy (Pt3Rh/C) and a bimetallic mixture (Pt3-Rh/C) to study the effect of catalyst structure on its catalytic activity and on the products formed during the ethanol oxidation in acid media. The nanoparticles were prepared by a modified polyol reduction method using ethylene glycol as a co-reducing agent and Pb as a material of sacrifice, to obtain very small and well-dispersed nanoparticles on the carbon support. Fourier transform infrared spectroscopy and derivative voltammetry was used to give insights about the ethanol oxidation mechanism occurring at the developed catalysts. The samples characterised by X-ray diffraction analysis showed distortions in the Pt lattice parameters for the Pt-Rh alloy structure due to the presence of Rh in the catalyst's composition. Transmission electron microscopy analyses indicate that nanoparticles were well-dispersed on a carbon support, with spherical shapes and small particle sizes (2-3 nm). In situ X-ray absorption spectroscopy data evidence that Pt-Rh interactions produce changes in the Pt 5d band vacancy. The electronic effect is maximized when Pt forms an alloy with Rh, resulting in the highest d-band vacancy of the Pt3Rh/C. The Pt3Rh/C catalyst showed the highest activity towards ethanol oxidation, presenting current densities in a quasi-steady-state condition (measured at 600 mV) around 5.2 times higher than the commercial Pt/C (Alfa Aesar). Moreover, the onset potential for ethanol oxidation shifts to more negative potentials (110 mV lower taken at 1 mA cm-2) was also observed. In situ FTIR data revealed that Pt/C catalyst favours the formation of acetic acid. The synergistic effect between Rh and the alloy structure results in an easier CC bond breaking for Pt3Rh/C, in comparison to Pt3-Rh mixture, thus favouring CO2 formation at lower potentials.

Electrodeposition of Pt3Sn Nano‐alloy on NiFe‐Layered Double Hydroxide with “Card‐house” Structure for Enhancing the Electrocatalytic Oxidation Performance of Ethanol

“…[7][8][9] In recent decades, tremendous efforts have been made toward new highly efficient catalysts. Among those catalysts, noble metal catalysts such as Pt, [10] Pd, [11,12] Ag, [13] Au, [14] Ir, [15] Ru, [16] and Rh [17] have attracted widespread attention as their high catalytic activity. In particular, platinumbased catalysts have become one of the most commonly used catalysts for DAFCs due to their durability.…”

Selective electrocatalytic hydrogenation of bio-oil to oxygenated chemicals via suppression of deoxygenation

“…5d) reveal a signi cant change in atomic bonding of the Rh atom compared to pure Rh. PtRhAu and PtRh catalysts exhibit a decreased Rh-M (M = Pt, Au, and Rh) coordination number and an increased Rh-M interatomic distance (PtRhAu > PtRh > Rh) compared to pure Rh, suggesting the formation of a PtRhAu solid solution alloy 31 . This increased Rh-M interatomic distance is consistent with the lattice expansion observed using STEM and XRD (Fig.…”

Realising the activity benefits of Pt preferential (111) surfaces for ethanol oxidation in a nanowire electrocatalyst

“…The band at 2050 cm -1 is attributed to the C-O stretch of linearly adsorbed CO (CO L ) [52]. CO L band was initially detected at 0.45 V for Pt/C NPs and 0.4 V for Pt/C NWs.…”