Highly Efficient SOFC System with Mk35x-Stack Module Operated with Gasified Biomass - HieffBioPower -

Abstract

A stationary SOFC system utilizing gas from a biomass updraft gasifier is under development within the project “HiEffBioPower” by MAWERA, BIOS, Bosal, AVL, Calida Cleantech, Fraunhofer IKTS, Wuppertal Institute and University Utrecht (European Union Horizon2020 No. 727330). The system is based on Mk352-CFY-stack with Chromium based (CFY) interconnects and electrolyte supported cells. These stacks are robust, redox stable and demonstrated low degradation rates. The stacks are arranged to modules of eight 30-cell stacks and are electrically connected in series. The stack module was pre-tested at the test rig at IKTS and showed performance in accordance with system requirements. Stationary power points were measured to compare the behaviour of the stack module with the system tests at MAWERA. AVL designed and installed the overall SOFC system (heat exchangers, stack, catalytic afterburner, process control and visualisation) with a nominal capacity of 6 kWel. After shipping all parts of the SOFC system to MAWERA in Hard (AT), the coupling of the biomass gasifier, the gas cleaning unit and the SOFC system was conducted. The system is operated by an automated process control. The highest efforts needed the novel gas cleaning unit, consisting of a high temperature filter, a desulphurisation unit as well as a novel catalytic gas reforming stage developed by BIOS. The biomass gasifier has been operated with wood chips of different quality. The high tar contents of the product gas make a tar cracking essential to reach a high calorific value of the gas for the SOFC system. The novel gas cleaning system shows good performance and reaches the defined SOFC requirements. The SOFC system developed and operated by AVL reached stable conditions for several days. The operating results of the stack module at lab conditions and at the real system are in a good agreement. The SOFC stack module performance in terms of cell voltages, stack temperature distribution and fuel utilization under biomass reformate fuel will be shown and supported by several simulation to get an overall energy balance. Examples of optimization for several components by CFD simulation and component tests will be given.

Operation of an SOFC CHP System with Wood Gas from a Fixed-Bed Updraft Gasifier

“…The FlexiFuel project, the approach and the methodology were described in detail in (1) and operational experience including the results of the implemented gas cleaning unit of the CHP system can be found in (2). Details of the gas cleaning process were published in (3,4) and results on the development of the stack module in (5). Literature on AVLs SOFC CHP platform regarding fuel flexibility can be found in (6).…”