Horizontal Pendulum Performance Analysis with Multilevel Model Plate on Ocean Wave Electric Power Plant (PLTGL)

Abstract

Abstract with the times and the industry, the energy sources such as fossil fuels dwindling. It encourages all parties to be more advanced and developed by creating solutions to renewable energy generation with the latest innovations, one of which is the sea wave power plant -pendulum system. Pontoon which uses pendulum system is one tool used to convert from ocean wave energy into electrical energy. In this study, the test conditions without using ballast onshore and off-shore testing with the ballasts. Obtained from testing the many rounds that can be generated pendulum pie plate thickness and the angle of the pontoon. To test the largest on-shore power obtained on the test using arc angle 30°, 3 mm thick, the angle of 60 o power produced 0036 watts. For testing offshore in the ballasts 12 cm, 15 cm, 17.5 cm, the largest power generated at 15 cm ballasts with 0041 watts power on pie, thick, and a tilt angle equal to the on-shore testing. Number of rounds with time, the on-shore testing that produces the greatest value in the segment with an angle of 30°, a thickness of 3 mm the angle of 60o value obtained 0.938 rad / s. In the off-shore test is highest value is filled with 15 cm ballasts with 0847 rad/s.

Design of 100 MW LNG Floating Barge Power Plant

“…The power plant will be built using an existing barge to minimalize error and failure during design process [14]. Damen Stan Pontoon B32 SPo9832 which shown by …”

Technical Analysis of Kort Nozzle Application for SPOB Ship 4990 DWT on River

“…Blade Element Momentum Theory Blade element momentum theory is a theory that combines blade element theory and the theory of momentum, is used to calculate the forces acting on the vane or turbine [11]. Blade element theory combined with the theory of momentum to alleviate some of the difficulties in calculating the speed of the rotor caused, see figure 1 [9].…”

Design of Air Ventilation System for Cargo Hold Vessels Using Solar Desiccant

“…With the difference in environmental conditions, the charge will be affected by micro-climate elements, especially air humidity [12][13][14][15][16][17][18].…”

“…In addition to the use of renewable energy for the fulfillment of the heating system needs of the dehumidification system will use exhaust gas from the engine and the fulfillment of the electrical power needs used for the fulfillment of electrical power from the rotary desiccants system using solar thermal energy which is then converted through the system from photovoltaic [13].…”

“…Type Cooling [7] Solar energy is energy derived from the process of converting solar heat through certain equipment into a resource in anotherenergi. Solar energy is one source of power generation other than water, steam, wind, biogas, coal, and petroleum [13].…”