Introduction: The widespread adoption of the ANTT®Clinical Practice Framework as a single standard for aseptic technique, has highlighted that many clinical procedures do not require a sterile procedure pack to be performed safely and aseptically. This study explores the utilisation of a partially-sterile procedure pack that is specifically tailored to Standard-ANTT. Methods: A prospective project improvement evaluation, using a non-paired sample (pre: n=41; post: n =33) of emergency department staff in an NHS hospital. Staff were evaluated performing peripheral intravenous cannulations (PIVC) using Standard-ANTT and the B. Braun Standard-ANTT peripheral cannulation pack. Findings: Significant improvements were observed in practice following the implementation of the pack and training in Standard-ANTT, including: Key-Part protection significantly improved (pre: n=28, 68.2%; post: n=33, 100%), and reduction in the Key-Site being touched after disinfection (pre: n=17; 41.4%; post n=5; 15.1%). Conclusions: In conjunction with appropriate education and training, this study provides proof of concept that due to the widespread use of the ANTT Clinical Practice Framework as a single standard aseptic technique, procedure packs that are specifically tailored to Standard-ANTT, can help to promote best practice and improve efficiencies. Definitions: Partially-sterile procedure pack - all items required to be sterile remain in their individual blister wrapper. The final assembled pack itself is not then subjected to a further round of sterilisation as it is not needed. Sterile procedure pack - often contains a mixture of non-sterile and sterile items that have been stripped from their individual blister wrapper requiring the sterilisation of the final assembled pack.