Hybrid porous media gasification of urban solid waste pre-treated by hydrothermal carbonization

Abstract

Global population growth and rising consumption levels have significantly increased resource use and energy demand, leading to higher greenhouse gas concentrations and increased waste output. As a result, alternative waste treatment methods for sustainable municipal solid waste (MSW) management are crucial. This research evaluates the efficiency of integrating hydrothermal carbonization (HTC) and gasification for an optimized MSW biomass blend. HTC was conducted for one hour at 220°C in a 5 L reactor, followed by gasification in a hybrid porous medium gasifier. The study investigated the effects of different filtration speeds on combustion temperature and hydrogen concentrations. The results showed that a filtration speed of 35 cm/s resulted in a maximum combustion temperature of 1035.7°C. The temperature remained consistent across filter speeds, while higher velocities yielded higher hydrogen concentrations. Additionally, increasing the filtration velocity raised temperatures in the hybrid bed while increasing the volumetric fraction of biomass decreased maximum temperatures. This research contributes to the understanding of merging HTC and gasification for MSW biomass blend treatment, aiming to reduce environmental impacts and costs while promoting renewable resources for long-term energy production.

Insights into hydrothermal treatment of biomass blends: Assessing energy yield and ash content for biofuel enhancement

“…The reactor’s pressure setting exceeded the calculated vapor pressure at the wall temperature registered by the thermocouple. The water inlet and outlet were regulated using a butterfly valve, as presented in [ 35 ]. Each charge biomass mixture (dry basis) adhered to the weight composition detailed in Table 2 .…”