Hydraulic Fracturing as Game Changer to Maximize Waterflooding Efficiency in a Brownfield

Abstract

Primary production mechanism of a clean sandstone reservoir in a brownfield for oil production has been recently changed from natural depletion to waterflooding. Despite the apparently moderate petro-physical properties of the formation, injector wells performances were observed to be extremely poor, mainly due to: high drilling-induced formation damage and Fluids interaction within the reservoir (injection across the oil rim section). Several stimulation technologies have been applied to improve wells injection capability for pressure support optimization. Re-perforation via abrasive jetting, perforations wash through coiled tubing and various acid formulations via bullheading were attempted without achieving any significant increase in injectivity. Considering the modest rock permeability, the need to access a wider formation area to improve oil sweep efficiency and the crucial requirement to re-pressurize the reservoir, an additional card was played as last resort: hydraulic fracturing. This technique was not new to the area and already experimented by different operators. Several producer wells in different layers were hydraulic fracturing stimulated with proppant and/or acid in the past with a good rate of success. Why not to try then? Given the past experience on the same field with hydraulic fracturing in oil producers and accounting for well integrity and potential injectivity, one was chosen as suitable candidate. Offset wells hystorical data were used to build a hydraulic fracturing reservoir model and plan for the activity in details; operator and service providers engaged in a Frac Well On Paper activity in order to reduce any margin of error during field operations. An approach that proved successful. From there, the first trial well was planned and performed successfully. 4 other hydraulic fracturing jobs on 4 wells followed at close distance in time with different, but steadily comforting, results. Injection was improved from negligible initial values up to 2000 mc/day for the post-stimulation condition, exceeding the preliminary expectations. This paper introduces the steps taken to start the hydraulic fracturing campaign, the decision process that led to the design of the treatment, an overview of the execution phases, results well by well and lessons learned to optimize future campaigns.