Hydrodynamics of a droplet passing through a microfluidic T-junction

Abstract

We develop a phase-field multiphase lattice Boltzmann model to systematically investigate the dynamic behaviour of a droplet passing through a microfluidic T-junction, especially focusing on the non-breakup of the droplet. Detailed information on the breakup and non-breakup is presented, together with the quantitative evolutions of driving and resistance forces as well as the droplet deformation characteristics involved. Through comparisons between cases of non-breakup and breakup, we find that the appearance of tunnels (the lubricating film between droplet and channel walls) provides a precondition for the final non-breakup of droplets, which slows down the droplet deformation rate and even induces non-breakup. The vortex flow formed inside droplets plays an important role in determining whether they break up or not. In particular, when the strength of vortex flow exceeds a critical value, a droplet can no longer break up. Additionally, more effort has been devoted to investigating the effects of viscosity ratio between disperse and continuous phases and width ratio between branch and main channels on droplet dynamic behaviours. It is found that a large droplet viscosity results in a small velocity gradient in a droplet, which restricts vortex generation and thus produces lower deformation resistance. Consequently, it is easier to break up a droplet with larger viscosity. Our work also reveals that a droplet in small branch channels tends to obstruct the channels and have small vortex flows, which induces easier breakup too. Eventually, several phase diagrams for droplet flow patterns are provided, and the corresponding power-law correlations ($l_{0}/w=\unicode[STIX]{x1D6FD}Ca^{b}$, where $l_{0}/w$ is dimensionless initial droplet length and $Ca$ is capillary number) are fitted to describe the boundaries between different flow patterns.

Role of metal foam in solidification performance for a latent heat storage unit

“…To overcome the inherent drawback of PCMs, the additives with high thermal conductivity, including metal matrix, graphite, nanoparticle, and PCM microencapsulation, are widely utilized. Bugaje performed an experimental research on the role of metal matrix in the thermal response of paraffin wax.…”

Optimization of the Melting Performance of a Thermal Energy Storage Unit with Fractal Net Fins

“…It is generally accepted that fractal geometry has the intrinsic advantages of minimized flow resistance [22,23] and strong heat transfer capability [24,25]. Therefore, there has been successful application of a fractal structure to the design of highly efficient heat exchangers [26,27], chemical reactors [28], heat sinks [29,30], and fluid distributors [31][32][33]. It was proven that fractal geometry can achieve a significant increase in the heat transfer area and flow access, with the increase in the fractal levels [34,35].…”

Numerical Study on Melting Heat Transfer in Dendritic Heat Exchangers

“…They have highly-efficient heat and mass transfer properties. At present, the dendritic structure has been widely used in optimizing the design of the channel structure in heat exchangers [23,24], chemical reactors [25], fuel cells [26,27] and microfluidic systems [28,29]. Moreover, the disc-shaped heat exchangers of dendritic structure, as a kind of point-to-area heat transfer structure, has been proved to be able to make even heat flow distribution and hence improve heat transfer performance as compared with traditional fin heat exchangers [30].…”