Hyperelastic Material Parameter Determination and Numerical Study of TPU and PDMS Dampers

Abstract

Dampers provide safety by controlling unwanted motion that is caused due to the conversion of mechanical work into another form of energy (e.g., heat). State-of-the-art materials are elastomers and include thermoplastic elastomers. For the polymer-appropriate replacement of multi-component shock absorbers comprising mounts, rods, hydraulic fluids, pneumatic devices, or electro-magnetic devices, among others, in-depth insights into the mechanical characteristics of damper materials are required. The ultimate objective is to reduce complexity by utilizing inherent material damping rather than structural (multi-component) damping properties. The objective of this work was to compare the damping behavior of different elastomeric materials including thermoplastic poly(urethane) (TPU) and silicone rubber blends (mixtures of different poly(dimethylsiloxane) (PDMS)). Therefore, the materials were hyper- and viscoelastic characterized, a finite element calculation of a ball drop test was performed, and for validation, the rebound resilience was measured experimentally. The results revealed that the material parameter determination methodology is reliable, and the data that were applied for simulation led to realistic predictions. Interestingly, the rebound resilience of the mixture of soft and hard PDMS (50:50) wt% was the highest, and the lowest values were measured for TPU.

Lightweight and Flexible Graphene Foam Composite with Improved Damping Properties

“…Therefore, PDMS has outstanding damping properties and has been investigated for energy-absorption applications. The viscoelastic properties of PDMS are beneficial to the passive vibration isolation in mechanical systems, making PDMS an ideal candidate material for shock-absorption materials [24][25][26]. Zhang et al prepared isotropic magnetorheological elastomers with GO-filled polydimethylsiloxane as a matrix via the solution-blending casting method.…”

Research on the Bionic Flexible End-Effector Based on Tomato Harvesting

“…Therefore, the finite element analysis software ANSYS (ANSYS 2020 R2) is used to simulate the static structure of fingers and tomato to analyze the bending performance. The key parameters of the TPU material are set as follows: Shore hardness = 85 A, density = 1200 kg/m 3 , Young ' s modulus = 11:7 MPa, and Poisson ' s ratio = 0:45 [25]. Create a Static Structural module in ANSYS Workbench, add TPU material properties, and enter the parameters to get the model.…”

A flexible propelled arm: Mechanical considerations for the use in UAVs

“…In this work, a Mooney-Rivlin model is proposed. The behavior is determined by obtaining 5 parameters which can be obtained experimentally from the stress-strain curve [22].…”