PVT Property Measurements for Some Aliphatic Esters from (298 to 393) K and up to 35 MPa

Abstract

The results of PVT measurements of the liquid phase within the temperature range of (298 to 393) K and up to 35 MPa are presented for some aliphatic esters. Measurements were made by means of a vibrating-tube densimeter, model DMA 512P from Anton Parr. The calibration of the densimeter was performed with water and n-heptane as reference fluids. The experimental PVT data have been correlated by a Tait equation. This equation gives excellent results when used to predict the density of the esters using the method proposed by Thomson et al. (AIChE J. 1982, 28, 671-676). Isothermal compressibilities, isobaric expansivities, thermal pressure coefficients, and changes in the isobaric heat capacity have been calculated from the volumetric data.

Dichloromethane: Revision and extension of pρT relationships for the liquid

“…One can conclude that Racket equation can represent adequately the saturated liquid density in all the range of (liquid + vapour) equilibrium even when Z RA is found from density data available for restricted ranges of temperature far from the critical temperature. This conclusion was already observed in previous studies [57,58]. Once the expressions for the reference state found, i.e.…”

Pressure–volume–temperature measurements of phosphonium-based ionic liquids and analysis with simple equations of state

“…The calibration of the vibrating tube densimeter was made by the method due to Niesen et al [43], which has a solid theoretical basis as discussed by Holcomb and Outcal [44]. The calibration details using this method can be found elsewhere [45]. The Nieseń s equation is…”

A new and reliable calibration method for vibrating tube densimeters over wide ranges of temperature and pressure

“…Average experimental uncertainties of ±0.3 kg Á m À3 were then reported for the liquid phase [10]. This model has one parameter less than that derived by Niesen [11], which has been used by some authors [17,18].…”