Imaging of CO₂ and Dissolved Inorganic Carbon via Electrochemical Acidification–Optode Tandem

Abstract

Dissolved inorganic carbon (DIC) is a key component of the global carbon cycle and plays a critical role in ocean acidification and proliferation of phototrophs. Its quantification at a high spatial resolution is essential for understanding various biogeochemical processes. We present an analytical method for 2D chemical imaging of DIC by combining a conventional CO2 optode with localized electrochemical acidification from a polyaniline (PANI)-coated stainless-steel mesh electrode. Initially, the optode response is governed by local concentrations of free CO2 in the sample, corresponding to the established carbonate equilibrium at the (unmodified) sample pH. Upon applying a mild potential-based polarization to the PANI mesh, protons are released into the sample, shifting the carbonate equilibrium toward CO2 conversion (>99%), which corresponds to the sample DIC. It is herein demonstrated that the CO2 optode–PANI tandem enables the mapping of free CO2 (before PANI activation) and DIC (after PANI activation) in complex samples, providing high 2D spatial resolution (approx. 400 μm). The significance of this method was proven by inspecting the carbonate chemistry of complex environmental systems, including the freshwater plant Vallisneria spiralis and lime-amended waterlogged soil. This work is expected to pave the way for new analytical strategies that combine chemical imaging with electrochemical actuators, aiming to enhance classical sensing approaches via in situ (and reagentless) sample treatment. Such tools may provide a better understanding of environmentally relevant pH-dependent analytes related to the carbon, nitrogen, and sulfur cycles.

Selective Deionization of Thin-Layer Samples Using Tandem Carbon Nanotubes–Polymeric Membranes

“…This result agrees with the uptake measured by potentiometry (Figure d) and confirms the capability of the CNT-ISM actuator to alkalinize the sample without the need of adding an external reagent. Notably, reagentless approaches based on solid-state materials able to modulate the sample pH are on the rise today. − This, in combination with either optical or electrochemical sensors, has already allowed for the development of disruptive analytical concepts. Some examples where alkalinization with the CNT-ISM actuator may be of interest include precipitation of cocaine for its electrochemical detection in complex powders (dissolved in water) and speciation of nitrogen (NH 3 /NH 4 + ) in environmental systems (e.g., waters and soils) …”

Optical sensors (optodes) for multiparameter chemical imaging: classification, challenges, and prospects

“…In a follow-up study, Wiorek et al combined the same 2D proton pump with a CO 2 optode, enabling the imaging of dissolved CO 2 and subsequently total dissolved inorganic carbon (DIC). 69 Based on those two images, total alkalinity, and pH images can also be calculated based on certain assumptions. Thus, this setup represents a four-parameter imaging approach (Fig.…”