Impact of layer thickness on the operating characteristics of In2O3/ZnO heterojunction thin-film transistors

Abstract

Combining low-dimensional layers of dissimilar metal oxide materials to form a heterojunction structure offers a potent strategy to improve the performance and stability of thin-film transistors (TFTs). Here, we study the impact of channel layer thicknesses on the operating characteristics of In2O3/ZnO heterojunction TFTs prepared via sputtering. The conduction band offset present at the In2O3/ZnO heterointerface affects the device's operating characteristics, as is the thickness of the individual oxide layers. The latter is investigated using a variety of experimental and computational modeling techniques. An average field-effect mobility ( μFE) of >50 cm2 V−1 s−1, accompanied by a low threshold voltage and a high on/off ratio (∼108), is achieved using an optimal channel configuration. The high μFE in these TFTs is found to correlate with the presence of a quasi-two-dimensional electron gas at the In2O3/ZnO interface. This work provides important insight into the operating principles of heterojunction metal oxide TFTs, which can aid further developments.

High Performance Amorphous IGO Thin Film Transistors Grown at Low Temperature

“…This may be ascribed to the instability of the a ‐IGO film structure grown in the experiment at high temperatures, which was prone to cracks and other defects. At the same time, the point of absorbing environmental pollutants on the membrane surface increased, [ 19 ] account for increased surface roughness, and the deterioration of the interface bonding state affected the carrier transport, and the device capability deteriorated accordingly.…”

Heterojunction oxide thin film transistors: a review of recent advances

“…This demonstrates the variation of the electrical properties of heterojunction oxide TFTs with relative thickness between front and back channel layers. 55…”

“…This demonstrates the variation of the electrical properties of heterojunction oxide TFTs with relative thickness between front and back channel layers. 55 Kim et al successfully fabricated IGZO/IZO heterojunction oxide TFTs using atomic layer deposition (ALD), achieving a high electron mobility of 38.77 cm 2 V −1 s −1 , high on/off ratio of ∼10 9 , and low SS of 0.19 V dec −1 . In comparison to the magnetron sputtering process, ALD is easier to control the thickness and can form uniform thin films due to its excellent film applicability.…”

Low-Power Phototransistor with Enhanced Visible-Light Photoresponse and Electrical Performances Using an IGZO/IZO Heterostructure

“…Therefore, in recent investigations, the emphasis has been on utilizing the defect states of oxide semiconductors, such as oxygen vacancies, to widen the detection range from UV to visible range [23][24][25][26]. Numerous methods such as doping, mechanochemical treatments, and forming a heterostructure with metal oxides have been studied to enhance visible-light photoresponse capability [26][27][28].…”