Impact of the gradient in gantry‐table rotation on dynamic trajectory radiotherapy plan quality

Abstract

BackgroundTo improve organ at risk (OAR) sparing, dynamic trajectory radiotherapy (DTRT) extends VMAT by dynamic table and collimator rotation during beam‐on. However, comprehensive investigations regarding the impact of the gantry‐table (GT) rotation gradient on the DTRT plan quality have not been conducted.PurposeTo investigate the impact of a user‐defined GT rotation gradient on plan quality of DTRT plans in terms of dosimetric plan quality, dosimetric robustness, deliverability, and delivery time.MethodsThe dynamic trajectories of DTRT are described by GT and gantry‐collimator paths. The GT path is determined by minimizing the overlap of OARs with planning target volume (PTV). This approach is extended to consider a GT rotation gradient by means of a maximum gradient of the path () between two adjacent control points () and maximum absolute change of G (). Four DTRT plans are created with different maximum G&∆G: & = 0.5&0.125 (DTRT‐1), 1&0.125 (DTRT‐2), 3&0.125 (DTRT‐3) and 3&1‍(DTRT‐4), including 3–4 dynamic trajectories, for three clinically motivated cases in the head and neck and brain region (A, B, and C). A reference VMAT plan for each case is created. For all plans, plan quality is assessed and compared. Dosimetric plan quality is evaluated by target coverage, conformity, and OAR sparing. Dosimetric robustness is evaluated against systematic and random patient‐setup uncertainties between in the lateral, longitudinal, and vertical directions, and machine uncertainties between in the dynamically rotating machine components (gantry, table, collimator rotation). Delivery time is recorded. Deliverability and delivery accuracy on a TrueBeam are assessed by logfile analysis for all plans and additionally verified by film measurements for one case. All dose calculations are Monte Carlo based.ResultsThe extension of the DTRT planning process with user‐defined to investigate the impact of the GT rotation gradient on plan quality is successfully demonstrated. With increasing , slight (case C, : up to‍−1‍Gy) and substantial (case A, : up to −9.3 Gy, case‍B,: up to −4.7‍Gy) improvements in OAR sparing are observed compared to VMAT, while maintaining similar target coverage. All plans are delivered on the TrueBeam. Expected and actual machine position values recorded in the logfiles deviated by <0.2° for gantry, table and collimator rotation. The film measurements agreed by >96% (2%‍global/2 mm Gamma passing rate) with the dose calculation. With increasing , delivery time is prolonged by <2 min/trajectory (DTRT‐4) compared to VMAT and DTRT‐1. The DTRT plans for case A and B and the VMAT plan for case C plan reveal the best dosimetric robustness for the considered uncertainties.ConclusionThe impact of the GT rotation gradient on DTRT plan quality is comprehensively investigated for three cases in the head and neck and brain region. Increasing freedom in this gradient improves dosimetric plan quality at the cost of increased delivery time for the investigated cases. No clear dependency of GT rotation gradient on dosimetric robustness is observed.

Robustness analysis of dynamic trajectory radiotherapy and volumetric modulated arc therapy plans for head and neck cancer

“…Compared to patient-setup uncertainties, these were generally small (sub-degree, sub-mm). Studies showed similar logfile-reported delivery uncertainties for DTRT and VMAT, indicating maintained mechanical accuracy for DTRT [9] , [19] , [20] . However, logfiles are insensitive to miscalibrations [21] .…”

“…Moreover, in the clinic, it could serve as an independent dose calculation for the generated plans. In such a case-by-case usage, also the combination of uncertainties could be evaluated, similar to previous studies [12] , [19] . In clinical practice, patient-setup and machine uncertainties can occur simultaneously.…”