Improved Corona Resistance of Epoxy Resin for Gas‐Insulated Equipment in Nitrogen Gas by Direct Fluorination

Abstract

Direct fluorination has demonstrated efficacy in modulating the surface electrical properties of epoxy insulators and preventing surface charge accumulation. Comparative corona treatments were conducted on both surface fluorinated (modified) epoxy samples and untreated (virgin/original) samples using a modified electrode setup in a nitrogen (N2) atmosphere. The purpose was to evaluate the resistance of the modified epoxy surface layer against corona discharge. The results of ATR‐IR analysis and SEM surface and cross‐sectional imaging indicate that corona treatment did not alter the chemical composition of the fluorinated sample or the thickness of the fluorinated layer. Based on assessments of potential decay and water contact angle measurements, the surface conductivity of the modified sample was decreased by corona treatment. The wettability of fluorinated sample remained unchanged after corona treatment, and no soluble degradation products were produced. Conversely, the surface conductivity of the virgin sample exhibited an increase following corona treatment, accompanied by the formation of soluble degradation products. These results confirm that direct fluorination improves the epoxy insulator's discharge resistance in N2 and provides technical support for enhancing the electrical performance of epoxy insulators in gas insulated equipment. © 2024 Institute of Electrical Engineers of Japan and Wiley Periodicals LLC.