Improvement of Corrosion Resistance and Solid Content of Zinc Phosphate Pigmented Alkyd Coating by Methacrylated Cardanol

Phosphorus Modified Cardanol: A Greener Route to Reduce VolaTile Organic Compounds and Impart Flame Retardant Properties to Alkyd Resin Coatings

“…Hence, their use is limited by European regulations [ 1 , 7 , 12 ]. Therefore, for several decades, research has focused on the development of water-based alkyd coatings through the use of emulsifiers [ 13 ]. Despite great progress, waterborne alkyd coatings suffer from poor scrub resistance, low corrosion resistance, an undesirable yellowing effect and the necessity for the use of biocide [ 7 , 13 , 14 ].…”

“…Therefore, for several decades, research has focused on the development of water-based alkyd coatings through the use of emulsifiers [ 13 ]. Despite great progress, waterborne alkyd coatings suffer from poor scrub resistance, low corrosion resistance, an undesirable yellowing effect and the necessity for the use of biocide [ 7 , 13 , 14 ]. In order to overcome these limitations, inorganic or organic fillers have to be incorporated into water-based alkyd coatings [ 15 ].…”

“…They have demonstrated that the viscosity of the alkyd resins decreased with the growing amount of CO, MACO and TSCO. In a second study, the authors demonstrated that the introduction of 5 wt% MACO or TSCO can reduce the amount of xylene up to 9 wt% while maintaining the viscosity of the alkyd coating formulations [ 13 ].…”

Cardanol-modified alkyd resins: novel route to make greener alkyd coatings

“…Indeed, several studies focused on the introduction of cardanol-based reactive diluent in alkyd resins but none of them dealt with the use of cardanolbased monomer during the polycondensation reaction. [25][26][27][28] Hence, the first part of this study focused on the synthesis of alkyd resins with monofunctional reactive cardanol, which due to its structure, could replace benzoic acid and partially fatty acids (Figure 1). Then, in a second part, a difunctional reactive cardanol has been synthetized and copolymerized for the synthesis of alkyd resins (Figure 1).…”

Preparation and characterisation of green nano-sized ceramic pigments with the spinel structure AB2O4 (A = Co, Ni and B = Cr, Al)

“…In the fields of surface engineering and ceramic industries, the use of inorganic pigments improves certain physical properties such as hardness, impermeability and corrosion resistance. Pigments are thus judged for both their tinting strength and for their heat stability and light from the external environment, as well as attacks from chemical agents in additives such as the mixtures, like binders and varnishes, used during coating operations [1][2][3][4][5][6].…”