Improving the Performance of the Layered Nickel Manganese Oxide Cathode of Sodium-Ion Batteries by Direct Coating with Sodium Niobium Oxide

Abstract

This research highlights the efficacy of NaNbO 3 as a coating for P2-Na 2/3 Ni 1/3 Mn 2/3 O 2 cathodes in sodium-ion batteries. The coating enhances the kinetic behavior and cyclability of the electrochemical cells, as shown by electrochemical measurements. XRD analysis indicates that Nb does not incorporate into the cathode structure, implying a physical interaction between the coating and the cathode material. XRF analysis and EDX mapping confirm the actual composition and uniform dispersion of elements throughout the sample, while the electron micrographs evidence the occurrence of NaNbO 3 particles modifying the surface of the layered oxide. The Ni 4+ /Ni 3+ and Ni 3+ /Ni 2+ redox pairs, along with the partially reversible oxidation of oxide to peroxide anions, contribute significantly to cell capacity, as revealed by XPS spectra. This last effect and the appearance of a co-intercalated phase at high voltage are positive factors to provide fast kinetics. Cyclic voltammograms show that samples coated with 2−3% NaNbO 3 have superior rate capability, with high capacitive response and apparent diffusion coefficients. These samples also have low impedance at the electrode−electrolyte interface, which helps deliver a high capacity at 5C. Further cycling at 1C shows improved cyclability in the bare and 3% coated samples, due to their higher diffusion coefficients on charging. Notably, the 3% NaNbO 3 -coated sample exhibits excellent cyclability below 0 °C, making it a promising cathode material for sodium-ion batteries.