Improving the photocatalytic performance of a perovskite ZnTiO3 through ZnTiO3@S nanocomposites for degradation of Crystal violet and Rhodamine B pollutants under sunlight

Tavakoli-Azar, Tayebeh; Mahjoub, Ali Reza; Sadjadi, Mirabdullah Seyed; Farhadyar, Nazanin; Sadr, Moayad Hossaini

doi:10.1016/j.inoche.2020.108091

Cited by 52 publications

(11 citation statements)

References 69 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…This ternary oxide has been widely used because of its outstanding properties and potential scientific and technical applications [17]. ZnTiO 3 has been investigated in a variety of applications as an antibacterial, catalyst, nanofiber, white pigment, microwave dielectric, gas sensor, nonlinear optical, corrosion inhibitor, and luminescent material [18][19][20][21][22][23], but its application in adsorption has not been sufficiently studied, despite the fact that the literature indicates that due to its great specific area, it could have an important potential as an adsorbent [24,25]. ZnTiO 3 is a polar oxide of the LiNbO 3 -type (LN-type) with both cations coordinated octahedrally in a three-dimensional framework of the octahedron perovskite (Pv) that shares corners [26].…”

Section: Introductionmentioning

confidence: 99%

DFT Study of Methylene Blue Adsorption on ZnTiO3 and TiO2 Surfaces (101)

et al. 2021

View full text Add to dashboard Cite

The search for alternative materials with high dye adsorption capacity, such as methylene blue (MB), remains the focus of current studies. This computational study focuses on oxides ZnTiO3 and TiO2 (anatase phase) and on their adsorptive properties. Computational calculations based on DFT methods were performed using the Viena Ab initio Simulation Package (VASP) code to study the electronic properties of these oxides. The bandgap energy values calculated by the Hubbard U (GGA + U) method for ZnTiO3 and TiO2 were 3.17 and 3.21 eV, respectively, which are consistent with the experimental data. The most favorable orientation of the MB adsorbed on the surface (101) of both oxides is semi-perpendicular. Stronger adsorption was observed on the ZnTiO3 surface (−282.05 kJ/mol) than on TiO2 (–10.95 kJ/mol). Anchoring of the MB molecule on both surfaces was carried out by means of two protons in a bidentate chelating (BC) adsorption model. The high adsorption energy of the MB dye on the ZnTiO3 surface shows the potential value of using this mixed oxide as a dye adsorbent for several technological and environmental applications.

show abstract

Section: Introductionmentioning

confidence: 99%

DFT Study of Methylene Blue Adsorption on ZnTiO3 and TiO2 Surfaces (101)

et al. 2021

View full text Add to dashboard Cite

show abstract

“…In contrast, the pseudo-second-order model assumes that the degradation process is controlled by the reactions that occur in the system due to chemisorption in the catalyst, as well as the process of sharing or exchanging electrons between the catalyst, the electrode, and the Congo red. In recent years, degradation processes have been reported that present this type of kinetic behavior, mainly when composites or combined systems are used [44][45][46][47]. With the data from the kinetic studies, the models for each process of degradation of the Congo red dye for the Langmuir-Hinshelwood isotherm for the pseudo-first order were applied as shown in Figure 9a and for the pseudo-second order Ho model as shown in Figure 9b.…”

Section: Evaluation Of the Degradation Capacity Of The Congo Red Dye By Photolysis Catalysis Photocatalysis Electrocatalysis And Photoelementioning

confidence: 99%

Photoelectrocatalytic Degradation of Congo Red Dye with Activated Hydrotalcites and Copper Anode

et al. 2021

View full text Add to dashboard Cite

Photoelectrocatalysis is a novel technique that combines heterogeneous photocatalysis with the application of an electric field to the system through electrodes for the degradation of organic contaminants in aqueous systems, mainly of toxic dyes. The efficiency of these combined processes depends on the semiconductor properties of the catalysts, as well as on the anodic capacity of the electrode. In this study, we propose the use of active hydrotalcites in the degradation of Congo red dye through processes assisted by ultraviolet (UV) irradiation and electric current. Our research focused on evaluating the degradation capacity of Congo red by means of photolysis, catalysis, photocatalysis, electrocatalysis, and photoelectrocatalysis, as well as identifying the effect of the properties of the active hydrotalcites in these processes. The results show that a maximum degradation was reached with the photoelectrocatalysis process with active hydrotalcites and a copper anode at 6 h with 95% in a half-life of 0.36 h. The degradation is favored by the attack of the OH• radicals under double bonds in the diazo groups where the electrode produces Cu2+ ions, and with the photogenerated electrons, the recombination speed of the electron–hole in the hydrotalcite catalyst is reduced until the complete degradation.

show abstract

“…In recent years, water contamination by dyes has become one of the most important global concerns [ 1 , 2 ]. Currently, there are more than 10,000 types of commercial dyes available with an annual production of over 7 × 10 5 tons [ 3 ], and with a considerable fraction discharged from industries such as textile, paper, plastic, leather, ceramics, cosmetics, pharmaceuticals, and food processing [ 4 , 5 , 6 ]. In particular, effluents from these industries are considered an important source of pollution that generates by-products that are dangerous to health, in addition to preventing the penetration of sunlight and delaying photosynthesis in aquatic systems [ 7 ].…”

Section: Introductionmentioning

confidence: 99%

La-Doped ZnTiO3/TiO2 Nanocomposite Supported on Ecuadorian Diatomaceous Earth as a Highly Efficient Photocatalyst Driven by Solar Light

2021

View full text Add to dashboard Cite

Currently, there is great interest in the use of TiO2 for photocatalytic remediation of wastewater. Doping, heterojunction, and immobilization on porous materials are effective methods to improve the photocatalytic efficiency of this semiconductor oxide. In this study, ZnTiO3/TiO2 (ZTO) and ZnTiO3/TiO2/La (ZTO/La) nanocomposites were successfully prepared and immobilized on diatomaceous earth (DE). The composition and texture of the composites prepared were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), diffuse reflectance spectroscopy (DRS), scanning electron microscopy (SEM-EDX), and specific surface area (SSA). The adsorption capacity and photocatalytic activity of the composites were determined via degradation of methylene blue (MB) in batch reactors. The materials evaluated were prepared in the shape of 0.2 cm (diameter) and 1.0 cm (length) cylindrical extrudates. The results indicate that the ZTO/La-DE composite exhibited higher efficiency for the removal of MB under solar irradiation than both ZTO-DE and DE. The pseudo-second-order model and the Langmuir isotherm model were better suited to explain the adsorption process. The highest degradation percentage of MB obtained was 96% after 150 min of irradiation. The results indicate that synthesized composite could be used for the removal of cationic dyes in wastewater.

show abstract

Improving the photocatalytic performance of a perovskite ZnTiO3 through ZnTiO3@S nanocomposites for degradation of Crystal violet and Rhodamine B pollutants under sunlight

Cited by 52 publications

References 69 publications

DFT Study of Methylene Blue Adsorption on ZnTiO3 and TiO2 Surfaces (101)

DFT Study of Methylene Blue Adsorption on ZnTiO3 and TiO2 Surfaces (101)

Photoelectrocatalytic Degradation of Congo Red Dye with Activated Hydrotalcites and Copper Anode

La-Doped ZnTiO3/TiO2 Nanocomposite Supported on Ecuadorian Diatomaceous Earth as a Highly Efficient Photocatalyst Driven by Solar Light

Contact Info

Product

Resources

About