In-Lens Band-Pass Filter for Secondary Electrons in Ultrahigh Resolution SEM

Abstract

Scanning electron microscopes come equipped with different types of detectors for the collection of signal electrons emitted from samples. In-lens detection systems mostly consist of several auxiliary electrodes that help electrons to travel in a direction towards the detector. This paper aims to show that a through-the-lens detector in a commercial electron microscope Magellan 400 FEG can, under specific conditions, work as an energy band-pass filter of secondary electrons that are excited by the primary beam electrons. The band-pass filter properties verify extensive simulations of secondary and backscattered electrons in a precision 3D model of a microscope. A unique test sample demonstrates the effects of the band-pass filter on final image and contrast with chromium and silver stripes on a silicon substrate, manufactured by a combination of e-beam lithography, wet etching, and lift-off technique. The ray tracing of signal electrons in a detector model predicate that the through-the-lens detector works as a band-pass filter of the secondary electrons with an energy window of about 3 eV. By moving the energy window along the secondary electron energy spectrum curve of the analyzed material, we select the energy of the secondary electrons to be detected. Energy filtration brings a change in contrast in the image as well as displaying details that are not otherwise visible.

Quantification of STEM Images in High Resolution SEM for Segmented and Pixelated Detectors

“…The SEMs we used allow observing samples in four imaging modes. Two modes of objective lens, namely high resolution (HR) and ultra-high resolution (UHR), differ by their resolution and by the presence or absence of a magnetic field around the sample [ 9 , 44 ]. If the beam deceleration (BD) mode is chosen, then an electrostatic field around the sample is added and two further microscope modes HR+BD and UHR+BD, become available.…”

Imaging Ferroelectric Nanodomains in Strained BiFeO3 Nanoscale Films Using Scanning Low-Energy Electron Microscopy: Implications for Low-Power Devices

“…However, in situ experiments are not possible and nanodomain switching cannot be captured, and the added conductive layer can limit further investigations with other microscopy techniques, such as conductive or electrostatic force microscopy . The pilot experiments were performed within a high-resolution SEM, Magellan 400 L, equipped with the beam-deceleration mode . Its schematic sketch with the detector position is illustrated in Figure a.…”

Optimization of Material Contrast for Efficient FIB‐SEM Tomography of Solid Oxide Fuel Cells

“…The electrical potential of the mirror electrode and the suction tube can be adjusted to alter the detection characteristic of the TLD. More details of the TLD capabilities are outlined by Konvalina et al [19]. In contrast to the previously mentioned detector, the concentric backscatter detector (CBS), mirror detector (MD) and in-column detector (ICD) are solid-state semiconductor detectors designed for capturing backscattered electrons.…”