In Situ Triaxial Testing To Determine Fracture Permeability and Aperture Distribution for CO₂ Sequestration in Svalbard, Norway

Abstract

On Svalbard, Arctic Norway, an unconventional siliciclastic reservoir, relying on (micro)fractures for enhanced fluid flow in a low-permeable system, is investigated as a potential CO sequestration site. The fractures' properties at depth are, however, poorly understood. High resolution X-ray computed tomography (micro-CT) imaging allows one to visualize such geomaterials at reservoir conditions. We investigated reservoir samples from the De Geerdalen Formation on Svalbard to understand the influence of fracture closure on the reservoir fluid flow behavior. Small rock plugs were brought to reservoir conditions, while permeability was measured through them during micro-CT imaging. Local fracture apertures were quantified down to a few micrometers wide. The permeability measurements were complemented with fracture permeability simulations based on the obtained micro-CT images. The relationship between fracture permeability and the imposed confining pressure was determined and linked to the fracture apertures. The investigated fractures closed due to the increased confining pressure, with apertures reducing to approximately 40% of their original size as the confining pressure increased from 1 to 10 MPa. This coincides with a permeability drop of more than 90%. Despite their closure, fluid flow is still controlled by the fractures at pressure conditions similar to those at the proposed storage depth of 800-1000 m.

Innovations in laboratory‐based dynamic micro‐CT to accelerate in situ research

“…After 3–4 minutes the bulk height of the head of the regular lager is less than 20 mm above the liquid surface, while for the Belgian strong ale still a head of around 55 mm is present. In general, the collapse of the foam structure can be attributed to inter‐bubble gas diffusion and liquid drainage (Bisperink et al ., 1992). The larger voids grow at the expense of smaller bubbles.…”

“…The fluid flow set up was used to saturate the container with contrast agent. A similar set up was used to determine fracture permeability and aperture distribution for CO 2 sequestration (Van Stappen et al, 2018). Other examples in field of geoscience are: the study of crack formation during free-thaw experiments on porous limestone (De Kock et al, 2015), determination of the effect of dissolved H2SO4 on the interaction between CO2brine and limestone (Thaysen et al, 2017), salt crystallisation dynamics in sandstone (Derluyn et al, 2016), carbonation processes of stainless-steel slag (Boone et al) and pore scale research for oil and gas applications (Bultreys et al, 2016;Bultreys et al, 2015).…”

Validation of Self‐Healing Properties of Construction Materials through Nondestructive and Minimal Invasive Testing

“…Another construction material for which the self‐healing performance has been studied by high resolution synchrotron CT, is the annular cement and the cement plugs of wellbores . The use of depleted oil and gas reservoirs for capture and storage of CO 2 is considered as one of the promising solutions to reduce global emission of greenhouse gasses but first the potential problem of CO 2 leakage through the fractured cement needs to be addressed.…”

Digital Drill Core Models: Structure-from-Motion as a Tool for the Characterisation, Orientation, and Digital Archiving of Drill Core Samples

“…Drill cores are difficult and expensive to obtain, and provide a unique (1D) window into subsurface conditions, providing direct evidence of a multitude of geological and petrophysical properties. Many of these are obtained through destructive testing, though some of which are increasingly assessed through digital imaging and processing, including magnetic resonance imaging (e.g., [11]) and CT scanning (e.g., [12]).…”