Increasing the Efficiency of Synthetic Iron Production by the Use of New Kit Lining

Abstract

The production of synthetic iron castings in Russia comprises 50% of all alloys produced; therefore, increasing their smelting efficiency is an urgent task in the industry. This process depends primarily on the efficiency of industrial frequency induction crucible furnaces using acid lining. In the present study, the properties of quartzite, which forms the basis of such a lining, were investigated. An analysis of the proposed variants for changing the composition of the acid lining for use at temperatures of 1550–1600 °C was conducted. Following the preliminary temperature treatment of raw quartzite, which was then subjected to a sintering regime, we determined the conditions under which it was possible to obtain a phase state, allowing for the operation of the lining at temperatures above 1450 °C. We determined the use of an electrocorundum of two fractions as an additive to the traditional composition of the acid lining. The industrial testing of a new liner composition for the smelting of synthetic cast iron in an induction crucible melting furnace with a single steel scrap-metal filling was assessed, which required the use of an increased amount of carburizing agent. The positive results obtained can be explained by the study of the spent lining, which withstood 345 smelting methods of genophasic rent analysis. The results of the test are based on the results obtained in a study conducted on the finished coating of the product.

Influence of Temperature Regimes of Synthetic Iron Smelting on Casting Production Efficiency

“…The structure of the quartzite lattice at 1550 • C is shown in Figure 7. The result obtained is similar to the result obtained for the Pervuralsky quartzite PKMVI-3 brand, which was made under the same conditions [48].…”

“…The structure of the quartzite lattice at 1550 °C is shown in Figure 9. The result obtained is similar to the result obtained for the Pervuralsky quartzite PKMVI-3 brand, which was made under the same conditions [48]. In order to decrypt the diffractograms obtained from the results of the research, the device software in the data bank, the cards describing the parameters of elementary cells were used.…”

“…In order to decrypt the diffractograms obtained from the results of the research, the device software in the data bank, the cards describing the parameters of elementary cells were used. These cards of elementary cells of quartzite used in this study are presented in a previous study by the authors [48].…”

“…The values of the averaged parameters characterizing the structure of the quartzite lattice exposed to temperatures during the sintering process of the lining are presented in a previous study by the authors [48].…”

Advancements in network-based management systems for enhanced business services

“…Therefore, Atelier "atelier". it needs automation of ordering the necessary materials for the most profitable handling of funds [2][3][4]. Which indicates the relevance of automation of the Atelier's work?…”