Influence of blast-furnace process thermal parameters on energy and exergy characteristics and exergy losses

Abstract

SUMMARYThe technology 'blast furnace}converter' dominates at present in the production of steel all over the world. Therefore, the blast-furnace process is continuously being improved, among others, by raising the thermal parameters, such as temperature and oxygen-enrichment of the blast, as well as the addition of auxiliary fuels. The changes in the consumption of coke go together with changes in the consumption of blast, the production of top-gas and its consumption in Cowper stoves, as well as the production of electricity in the recovery turbogenerator utilizing the waste exergy of the top-gas due to raised pressure. Related to a unit of pig iron production, these values are called energy (exergy) characteristics of the blastfurnace plant. They serve as a quantity measure of the thermal improvement of the blast-furnace process. This paper presents an algorithm of the process exergy analysis of simulative investigations of the influence of increased thermal parameters on the thermodynamic perfection of the process and the blast-furnace plant. This algorithm bases on the theoretical empirical balance method of the 'input-output' type. By means of this algorithm the influence of increased thermal parameters of the process not only on the saving of coke but also of the blast can be determined, as well as of the production and composition of top-gas, the consumption of top-gas in the Cowper stoves and the production of electric energy in the recovery turbine. The blast-furnace process displays a high exergy efficiency, whereas the process of compressing and preheating the blast is characterized by rather high exergy losses due to the application of the combustion process. It has been shown that the internal exergy losses in the blast furnace are comparable with the exergy losses in the processes of compressing and preheating of the blast. Calculations were carried out for a modern Polish blast furnace with a volume of 3200 m 3 .

Exergo-Ecological Assessment Of Auxiliary Fuel Injection Into Blast-Furnace

“…For the purpose of Exergy and TEC analysis the "input-output" model [7,8] has been applied for prediction of PCI direct effects and zone balance model [14] for simulation of direct effects of top-gas recirculation. The scheme of blast furnace with assumed temperature zones for modelling purposes has been presented in Fig.…”

“…The I-O model let to predict the influence of operational parameters changes x 0 → x 1 on energy characteristic of BF plant including: consumption of coke (K) and blast (D), production of top-gas (G) and its chemical energy (E), as well as, the chemical energy of the top-gas feeding the gas-system (E Z ). Moreover the model of top-gas expansion turbine [7,8,14] let to evaluate the production of electric energy by the recovery turbine of top-gas (E el ). For example the carbon element balance is presented by Eq.…”

“…The exergy efficiency of the whole blast furnace plant, including Cowper stoves, (Fig. 2) reaches the level of about 65 % [7,8]. Such high thermodynamic effectiveness of the process is possible because the counter flow of heat and substance is realised in the shaft of this furnace [9].…”

“…These models in details has been discussed e.g. in [7,8,14]. Results of modelling, so called energy characteristics of blast furnace plant represents input data for both -direct and cumulative exergy analysis by means of TEC.…”

Exergy-Based Efficiency Analysis of Pyrometallurgical Processes

“…Costa et al [13] compared the exergetic efficiency of different steel production systems in a more practical way. Nogame et al [14] and Ziebik and Stanek [15,16] focussed in particular on blast furnaces. Finally, the exergetic performance of ladle furnaces during steelmaking has been analysed by Camdali and Tunc [17,18] and by Mapelli and Baragiola [19] .…”