Influence of silane‐modified coconut shell powder on thermal and mechanical properties of thermoplastic elastomers

Abstract

A silane coupling agent (glycidyloxypropyltrimethoxysilane, GPTMS) was used to modify coconut shell powder (CSP), and the influence of the modified coconut shell powder (G‐CSP) on the thermal and mechanical properties of thermoplastic elastomers (TPEs) was investigated. The thermal stabilities of the G‐CSP‐TPEs were studied using TGA; Young's modulus of the G‐CSP‐TPEs was studied by means of the spherical indentation test and the tensile test, and the tensile test was also used to characterize the tensile strength of the G‐CSP‐TPEs. The results revealed that the specific functional groups of GPTMS were efficiently grafted onto the CSP and that G‐CSP enhanced the thermal stability of the TPEs. Under 8% strain, Young's moduli of 0–7.5 wt% G‐CSP‐TPEs obtained by the spherical indentation test and tensile test were almost equal, while the modulus of 10–15 wt% G‐CSP‐TPEs measured by the latter test was greater than that of the former test. The tensile strength of G‐CSP‐TPEs increased up to a threshold limit (10 wt% G‐CSP), followed by a significant decrease. Micro‐images of the fractured surfaces obtained by SEM indicated that the addition of G‐CSP gradually filled the microvoids in the matrix and enhanced the tensile strength of the composite. As the G‐CSP mass percentage exceeded a threshold limit (>10 wt%), the particles started to agglomerate, resulting in weak interfacial adhesion and inferior mechanical properties. Hence, an optimal amount of reinforcing agent G‐CSP should be added to attain desirable thermal and mechanical properties. © 2020 Society of Chemical Industry

A rapid method to evaluate the chocolate smoothness based on the tribological measurement

“…These two dimensions of prepared samples were of 30 mm × 30 mm × 5 mm and Φ20 mm × 3 mm, and used for different tests, as mentioned below. The preparation method was in accordance with the methods of (Cheng et al, 2018; Qian, Cheng, Ni, Yu, & Zhang, 2020). In addition, the ceramic ball with a diameter of 6 mm and a glass with a cuboid of 30 mm × 30 mm × 5 mm was used as the rubbing pair to estimate the tribological properties of certain foods.…”

Sustainable, processable and cytocompatible bioelastomers based on polycaprolactone and biobased polyester elastomer via dynamic vulcanization

“…Recently, improved strategies for preparing thermoplastic elastomers (TPEs) with excellent properties in processing and repeating processes 4,5 have been applied to solve these problems. One of the most interesting strategies is to prepare thermoplastic vulcanizate (TPV), a special class of TPEs whose properties are closer to those of a thermoset rubber compared with other TPEs.…”