Influence of Water Content on the Mechanical Behaviour of Limestone: Role of the Clay Minerals Content

Abstract

International audienceThe mechanical characteristics of various sedimentary stones significantly depend on the water content, where 70% loss of their mechanical strengths can be observed when saturated by water. Furthermore, the clay fraction has been shown to be a key factor of their hydro-mechanical behaviour since it governs for instance the hydric dilation. This work aims at investigating the correlations between the clay minerals content and the mechanical weakening experienced by limestones when interacting with water. The experimental characterization focuses on five different limestones that exhibit very different micro-structures. For each of them, we present the determination of clay minerals composition , the sorption isotherm curve and the dependences of tensile and compressive strengths on the water content. It emerges from these results that, first, the sorption behaviour is mainly governed by the amount of smectite layers which exhibit the larger specific area and, second, the rate of mechanical strength loss depends linearly on the sorption capacity. Indeed, the clay fraction plays the role of a retardation factor that delays the appearance of capillary bridges as well as the mechanical weakening of stones. However, no correlation was evidenced between the clay content and the amplitude of weakening. Since the mechanisms whereby the strength decreases with water content are not clearly established, these results would help to discriminate between various hypothesis proposed in the literature

Efficiency and Compatibility of Selected Alkoxysilanes on Porous Carbonate and Silicate Stones

“…After consolidation, clays seem to have been preferentially strengthened (Figure 2d), which probably helped to increase the mechanical strength above the sound condition. Clay minerals are known to be the governing factor influencing specific stone properties like e.g., sensitivity to weathering [68,69] or the hydro-mechanical behaviour with an extensive loss of strength [70]. In his book about alkoxysilanes and the consolidation of stone, Wheeler [24] (pp.…”

Influence of cyclic wetting‐drying on the mechanical strength characteristics of coal samples: A laboratory‐scale study

“…This resulted in a more significant swell‐shrink effect of the clay minerals. The swell‐shrink effect of the clay minerals then accelerated crack propagation and microcrack tip erosion . Under cyclic wetting‐drying, the deterioration and damage effects on coal were accumulated.…”

“…The effect of water on the properties of various types of rocks could induce complex physical and chemical reactions . The presence of water is key cause of microstructural and macroscopic mechanical deterioration in a wide range of rocks .…”

Impact of mineral composition and distribution on the mechanical properties of porous media

“…Nevertheless, in spite of its excellent environmental benefits, CO2 capture and storage in underground geological formations implementation is limited. This is in part due to a lack of understanding of fundamental water-rock-CO2 interactions, including, for example, the effect of clay mineralogy on the coupled hydro-mechanical phenomena [3][4][5]. Injection of CO2 in saline aquifers results in the formation of carbonic acid and subsequent dissolution of primary minerals and alterations of the natural rock mechanical properties.…”